Superflex Wide Joint
Flexible tile grout for walls and floors
For use on walls and floors, BAL Superflex Wide Joint is perfect for grouting porcelain, glazed and fully vitrified tiles, glass and ceramic mosaics, marble and natural stone in dry or wet interior and exterior environments.BAL Superflex Wide Joint is perfect to use for joints up to 3mm to 20mm and is recommended for swimming pools and for limited movement areas including overlaid plywood floors (minimum 15mm) and heated screeds.
Contractors should consider BAL Superflex Wide Joint grout for domestic and commercial wall and floor tiling installations over heated screeds, areas of limited movement, and total immersion where wide joints are required. Available in pack sizes of 10kg and 3.5kg, it comes in six handy colours white, ivory, grey, charcoal, limestone and sandstone. Typical coverage of 2.24m2 per kg can be achieved with a 3mm joint width with 200x200x9mm tiles.
JOINTS: from 3mm – 20mm
- most tile types, including porcelain
- dry/wet – interior/exterior
- including swimming pools/power showers
POT LIFE AT 20°C: 30 minutes
SETS IN: 24 hours
COLOUR: White; Grey; Ivory; Charcoal; Limestone and Sandstone (10kg/3.5kg)
TYPICAL COVERAGE (per pack): TILE SIZES: 300x300x9mm 200x200x9mm with JOINT WIDTH: 3mm 3mm SIZES: 10kg 32.6m² 21.9m² 3.5kg 11.4m² 7.7m²