Wide Joint

Tile grout for walls and floors

Overview
Technical Data
  • BAL Wide Joint is a water and frost resistant cementitious tile grout for walls and floors and is suitable for joint widths from 2mm to 12mm. Suitable for grouting ceramics, mosiacs and natural stone/quarry tiles, in dry or wet interior and exterior environments, BAL Wide Joint comes in four colours: ivory, grey, limestone, and sandstone. While recommended for swimming pools, BALWide Joint is not suitable for power showers, food preparation/storage areas and areas requiring waterproof grouting.

    Contractors should consider BAL Wide Joint grout for both commercial and domestic wall and floor tiling projects where joints are up to 12mm wide. Perfect for swimming pools, areas of movement and heavily trafficked floors, BAL Wide Joint has a pot life of 30 minutes allowing sufficient working time, cures in 24 hours and comes in pack sized of 10kg and 3.5kg. Added flexibility, increased adhesion and reduced water permeability can be obtained by adding BAL Admix GT1.


  • JOINTS: from 2mm – 12mm

    USE FOR:

    • ceramics/mosaics
    • dry/wet – interior/exterior
    • including swimming pools/showers (NOT power showers)

    POT LIFE AT 20°C: 30 minutes

    SETS IN: 24 hours

    COLOURS: Grey (10kg/3.5kg), Ivory (10kg), Limestone and Sandstone (10kg only)

    TYPICAL COVERAGE (per pack):
    TILE SIZES: 300x300x9mm 200x200x9mm
    with JOINT WIDTH: 3mm 3mm
    SIZES: 10kg 32.2m² 21.6m²
    3.5kg 11.3m² 7.6m²