WP1 Coating

Waterproof system for walls & floors

Technical Data
  • BAL’s WP1 coating provides flexible and seamless waterproofing before tiling in showers, bathrooms, kitchens and laundry/utility rooms. BAL WP1 Coating sets in 24 hours and is suitable for use on most substrates in dry or wet interior areas, including areas where movement may occur such as drainage channels, upstands, pipes and floor wastes. If required it may be reinforced with polyester matting and tape.

    For use as part of tanking system for complete waterproof protection, BAL WP1 Coating is acrylic-based and is recommended for domestic and commercial installations. While not suitable for exterior use or for areas of total immersion, BAL WP1 can be applied on most backgrounds and bases. Temperature resistant from -30C to 100C, BAL WP1 is paintable and easy to apply offering significant time savings.

    Also  available – 2.5L BAL Prime APD, 5m /50m BAL Polyester Tape, 1m2 / 50m2 BAL Polyester Matting

  • USE FOR:

    • flexible, seamless waterproofing before tiling
    • most substrates
    • dry/wet interior
    • showers, bathrooms, kitchens, laundry/utility rooms
    • around drainage channels, upstands, pipes and floor wastes

    MAY BE TILED AFTER: 24 hours

    COLOUR: Grey

    TYPICAL COVERAGE (per pack):
    with THICKNESS: 1mm
    SIZE: 8kg 4.8 – 5.6m²