Multi-purpose one-coat DPM,primer and waterproofer
Multi-purpose two component, solvent free, low viscosity epoxy coating for use as a primer, one-coat DPM and waterproof coating prior to the application of ceramic tiles or natural stones on walls and floors, internally and externally. Ideal for raised access floors, wet rooms, ground floor slabs, and swimming pools. Use as a DPM on concrete up to 98% RH and anhydrite up to 87% RH. Can be used as a primer to aid adhesion to screeds, masonry, steel and other surfaces.
BAL DPM is a must have product for any stockist providing fixers and contractors with an all-in-one DPM, waterproofer and primer. BAL DPM should be recommened where a structural DPM is not present or has degraded over time and is ineffective. Resistant to grease, oil, aqueous salt solutions and hydrostatic pressure, new BAL DPM is perfect for internal or external projects such as subterranean rooms, balconies, marine, plant rooms, sewage plants and swimming/hydrotherapy pools.
Also available for a complete system: BAL Sand, BAL Self Adhesive Butyl Tape, BAL A2 Trowel, BAL B2 Trowel
- Specifically formulated to be used as a 1-coat DPM for concrete and cement up to 98% RH and anhydrite up to 87% RH
- Priming later to screeds, concrete, renders or masonry surfaces, steel and other vertical and horizontal surfaces (sand blind when tiling)
- Waterproof coating – Sand blinding required when tiling.
Composition: Epoxy resin paste + epoxy hardener.
Colour: Light Grey
Pack sizes: 5 litre
Key features: Chemical-resistant. Solvent free. Waterproof. Durable and abrasion-resistant.
Pot life: 20 mins
Initial Cure: 8hrs
TYPICAL COVERAGE (per pack): SIZE: 5lt 13.5 m² (at 350 microns DPM with B2 Trowel)
24 m² (at 200 microns Primer with A2 Trowel)
25 m² BAL Sand
10m BAL Self Adhesive Butyl Tape