Tile grout for walls and floors
BAL Wide Joint is a water and frost resistant cementitious tile grout for walls and floors and is suitable for joint widths from 2mm to 12mm. Suitable for grouting ceramics, mosiacs and natural stone/quarry tiles, in dry or wet interior and exterior environments, BAL Wide Joint comes in four colours: ivory, grey, limestone, and sandstone. While recommended for swimming pools, Wide Joint is not suitable for power showers, food preparation/storage areas and areas requiring waterproof grouting.
Consider BAL Wide Joint for floor and wall tile projects with wide joints. BAL Wide Joint is perfect for swimming pools, areas of movement and heavily trafficked floors and is suitable for domestic and commercial projects. Curing in 24 hours, BAL Wide Joint comes in 10kg and 3.5kg packs, and further applications are possible by adding BAL Admix GT1 to provide flexibility, increased adhesion and reduced water permeability.
JOINTS: from 2mm – 12mm
- dry/wet – interior/exterior
- including swimming pools/showers (NOT power showers)
POT LIFE AT 20°C: 30 minutes
SETS IN: 24 hours
COLOURS: Grey (10kg/3.5kg) and Ivory (10kg), Limestone and Sandstone (10kg only)
TYPICAL COVERAGE (per pack): TILE SIZES: 300x300x9mm 200x200x9mm with JOINT WIDTH: 3mm 3mm SIZES: 10kg 32.2m² 21.6m² 3.5kg 11.3m² 7.6m²