Tile & Grout

D2T tile adhesive and grout for walls

Overview

Technical Data

Calculator

• BAL Tile & Grout is a ready-to-use all-in-one tile adhesive and grout. Non-slip with high bond strength, BAL Tile & Grout is perfect for fixing ceramics (up to 300x300mm), mosiacs and some natural stone in dry and wet interior environments. Suitable for domestic areas including showers (adhesive only – not power showers), kitchens and bathrooms, BAL Tile & Grout can also be used for heavy duty wet areas including commercial kitchens. For walls only.

  If your looking for an all-in-one tile adhesive and grout for domestic and commercial walls, then look no further than BAL Tile & Grout. This ready-mixed product provides tilers with a number of benefits including an easy-to-use formulation with improved characteristics including extended open time. As an adhesive BALTile & Grout can be grouted after 24 hours. Available in 5ltr and 2.5ltr pack sizes .

• USE FOR:

  • ceramics/mosaics/some natural stone
  • dry/wet – interior
  • most interior domestic walls (commercial walls as adhesive only)

  GROUT AFTER: 24 hours OF ADHESIVE APPLICATION

  COLOUR: White

  • 

  • Technical Data Sheet
  • Material Safety Data Sheet
  • Declaration of Performance
  • 25 Years Guarantee
  • EPD

  TYPICAL COVERAGE (per pack):

  	AS ADHESIVE		AS GROUT
  	DRY WALL	WET WALL	(200x200x8mm tiles and 3mm joints)
  SIZES:
  5L	3.84m²	1.92m²	16.6m²
  2.5L	1.92m²	0.96m²	8.3m²

• Area to be covered in m²

  Bed thickness 1mm2mm3mm

  Calculate

  Results

  The number of units required for your project

  The calculation above indicates the approximate number of units required, and does not allow for site conditions or wastage