Waterproofing Kit

The complete waterproofing kit

Technical Data
  • A waterproof protection system for walls and floors, our BAL Waterproofing Kit provides complete protection of substrates (when used as part of a tanking system) prior to the installation of wall and floor tiles in dry or wet interior environments. Not suitable for exterior use or total immersion, it is recommended for showers, bathrooms, kitchens and laundry/utility room. Includes acrylic-based primer and coating,  50m BAL polyester tape and 50m2 roll BAL Polyester Matting.

    If you’re looking for a complete tanking solution for domestic showers and wetrooms then look no further than our BAL Waterproofing Kit. Coming in handy 5kg kits for 2.7-3.5m2, additional sizes are also available in 8kg (coating) and 2.5 litre (Prime APD). Dry in 24 hours, the coating can be easily applied with either a brush or steel float.

  • USE FOR:

    • wet – interior
    • showers, wet rooms, laundry/utility rooms
    • around drainage channels, upstands, pipes and floor wastes
    • industrial, commercial and domestic

    MAY BE TILED AFTER: 24 hours

    NOTE: Not suitable for exterior use or total immersion

    TYPICAL COVERAGE (per pack):
    SIZE: 5kg 2.7-3.5m²
    Sufficient for 1 domestic shower unit