WP1 Coating

Waterproof system for walls & floors

Technical Data
  • BAL’s WP1 coating provides flexible and seamless waterproofing before tiling in showers, bathrooms, kitchens and laundry/utility rooms. WP1 sets in 24 hours and is suitable for use on most substrates in dry or wet interior areas, including areas where movement may occur such as drainage channels, upstands, pipes and floor wastes. If required it may be reinforced with polyester matting and tape.

    Specify WP1 for use as part of a tanking system for showers and wet rooms. Setting in 24 hours, WP1 helps prevent water penetration through suspended floors and is suitable for most backgrounds. While not suitable for areas of total immersion, WP1 is recommended for waterproofing domestic areas prior to fixing wall and floor tiles.

    BAL WP1 is paintable and easy to use when applied with a brush or steel float.

    Also  available – 2.5L BAL Prime APD, 5m /50m BAL Polyester Tape, 1m2 / 50m2 BAL Polyester Matting

  • USE FOR:

    • flexible, seamless waterproofing before tiling
    • most substrates
    • dry/wet interior
    • showers, bathrooms, kitchens, laundry/utility rooms
    • around drainage channels, upstands, pipes and floor wastes

    MAY BE TILED AFTER: 24 hours

    COLOUR: Grey

    TYPICAL COVERAGE (per pack):
    with THICKNESS: 1mm
    SIZE: 8kg 4.8 -5.6m²