BAL Level Plus

Unique, rapid-setting 1-part or 2-part smoothing and levelling compound.

Overview
Technical Data

  • BAL Level Plus is a unique 1-part or 2-part rapid-setting smoothing and levelling compound. Mix with water for use in standard installations, or mix with BAL Level Plus Liquid latex as a high-performance 2-part, moisture tolerant floor leveller for superior enhanced performance. Use from 2-12mm as a 1-part over concrete, sand:cement screed, anhydrite and old tile adhesive residue, use from 2-10mm as a 2-part with latex over bitumen, flooring grade asphalt, underfloor heating, direct onto glazed tiles, existing vinyl (not LVT) and under DPMs.

    Choose the performance you need, whatever the floor substrate you need to level with BAL Level Plus. For a super smooth finish over most common substrates – just add water! For more problematic substrates, just add BAL Level Plus Liquid! Whether you mix with water, or latex, you get a long pot life of 25 minutes, and once poured, you can be tiling in 2-3 hours for fast track tiling. Need to go deeper? Build up to 30mm bed depths with aggregate!

  • USE FOR:
    – Preparing floors for tiling

    AS A 1-PART MIX WITH WATER OVER:
    – Concrete
    – Sand:Cement Screeds
    – Anhydrite Screeds
    – Cementitious flowing screeds
    – Unglazed tiles / stone
    – Old Tile Adhesive Residues
    – Use from 2-12mm (up to 30mm with aggregate)

    AS A 2-PART MIX WITH BAL LEVEL PLUS LIQUID:
    – Underfloor heating / heated screeds
    – Asphalt (flooring grade)
    – Existing vinyl tiles (not LVT)
    – Flooring grade bitumen and residues
    – Direc on glazed Ceramic Tiles
    – Under a Damp Proof Membrane (DPM)
    – Use from 2-10mm (up to 30mm with aggregate)

    MAY BE TILED AFTER 2-3 HOURS

    CAN BE SPIKE ROLLED

    TYPICAL COVERAGE AT 3MM THICKNESS (per pack):
    1-PART WITH WATER 2-PART WITH LATEX
    SIZE: 20kg 4m2 4m2

You may also need: