BAL AF Max

Rubber-crumb adhesive that performs as an uncoupling and fixing system in one.

Overview

Technical Data

• A unique rubber-crumb, high-yield tile adhesive that performs as an uncoupling and fixing system in one – removing the need for uncoupling mats on problematic floors. BAL AF Max has anti-fracture technology that absorbs lateral stress movement from the floor protecting tiles from failures. With BAL AF Max get up to 8.5m2 per bag, meaning only 4 bags are needed for a 30m2 area.

  BAL AF Max is a game-changing innovation – saving you time, money and materials compared with a traditional uncoupling system. 40% lower cost, 70% time saving and 70% less materials compared with alternate fixed uncoupling mat system and required adhesive. Use over most substrates plus asphalt, bitumen, plywood overlays and steel.

  New BAL red 30ltr mixing buckets now available – perfect for this high-yield, high-volume product.

• USE FOR:
  Most types of FLOOR and WALL tiles including:

  • Ceramics
  • Porcelain and fully vitrified tiles
  • Mosaics
  • Natural Stone including marble
  • Slate

  Most substrates including:

  • Asphalt (suitable grade e.g. flooring)
  • Bitumen adhesive residues
  • Concrete, cement:sand screeds and rendering
  • Anhydrite Screeds
  • Existing vinyl tiles, unglazed ceramic tiles, quarry tiles, terrazzo and natural stone
  • Fibre reinforced cement boards and lightweight tile backer boards
  • Tongued and grooved floorboards, plywood overlay
  • Underfloor heating
  • Existing thermoplastic vinyl tiles

  Other substrates that may be suitable include:
  Steel, GRP (internal dry), Epoxy coatings

  POT LIFE AT 20C: 45 Minutes

  GROUT AFTER: 5 hours
  
  COLOUR: Grey

  PACK SIZE: 17kg (7.4 – 8.5m2)
  
  CLASSIFICATION: BS EN 12004 C1S2

  • 
  • 
  • 

  • Technical Data Sheet
  • Material Safety Data Sheet
  • Material Safety Data Sheet (EU)
  • Declaration of Performance
  • EPD