Absolute Grout
Hygienic waterproof tile adhesive and grout for walls and floors
-
Chemical-resistant and solvent free, Absolute Grout is a high strength three-part epoxy adhesive and grout suitable for walls and floors. Durable and abrasion-resistant, it provides an excellent set in 16 hours with full cure at seven days. Its use is recommended for food preparation areas where a hygienic surface is required. Absolute Grout is recommended for; domestic bathrooms and kitchens, worktops, breweries, abattoirs, dairies, swimming and hydro therapy pools, bathrooms, showers and power showers, hospital and industrial/chemical plants.
BAL Absolute Grout provides total waterproof protection for wet areas, plus chemical resistance where required. Available in White, Smoke and Ebony, it matches closely with BAL Micromax2 cement-based grout. Suitable for use from 2-12mm it has an “easy-clean” formulation – clean off from 15 minutes and up to 60 minutes after application. Smoother fillers means it is easy to apply and will not scratch glass or gloss tiles. Also suitable as an adhesive where a high level of adhesion or chemical resistance is required.
-
USE AS AN ADHESIVE FOR:
- Fixing wall and floor tiles; ceramics, porcelain and fully vitrified tiles, mosaics, and glass or translucent tiles including glass mosaics
- Suitable for use with approved resin backed stone tiles.
- Ideal for use in wet areas, including swimming pools.
- For interior and exterior environments where high levels of adhesion and/or chemical resistance is required
USE AS A GROUT FOR:
- Grouting wall and floor tiles; ceramics, porcelain and fully vitrified tiles, mosaics, in dry or wet interior and exterior environments that are subject to chemical attack, or where a hygienic, durable, abrasion-resistant, waterproof finish is required.
- For joint widths from 2-12mm.
- Recommended for food preparation areas where a hygienic, easily cleaned surface is required.
POT LIFE AT 20C: 60 minutes
SETS IN: 16 hours
COLOURS: White, Ebony, Smoke
JOINT WIDTHS: 2 to 12mm
PACK SIZE: 2kg
CLASSIFICATIONS: BS EN 12004 R2 (Adhesive), BS EN 13888 RG (Grout)
TYPICAL COVERAGE AS GROUT (per pack): WALL FLOOR TILE SIZES: 150x150x5mm 300x300x9mm with JOINT WIDTH: 2mm 3mm SIZES: 2kg 5m² 3.7m² TYPICAL COVERAGE AS ADHESIVE WITH MOSAIC TROWEL (per 2kg pack): 0.7 -1.1m2 depending on nature of surface and on trowel used.