• Watch the video

BAL Level Plus

Unique 1-part or 2-part rapid-setting smoothing and levelling compound

Overview

Technical Data

• BAL Level Plus is a unique 1-part or 2-part rapid-setting smoothing and levelling compound. Mix with water for use in standard installations, or mix with BAL Level Plus Liquid latex as a high-performance 2-part, moisture tolerant floor leveller for superior enhanced performance. Use from 2-12mm as a 1-part over concrete, sand:cement screed, anhydrite and old tile adhesive residue, use from 2-10mm as a 2-part with latex over bitumen, flooring grade asphalt, underfloor heating, direct onto glazed tiles, existing vinyl (not LVT) and under DPMs.

  Specifiy BAL Level Plus as either a standard 1-part leveller for most common floor substrates – such as concrete, sand:cement and anhydrite. For more problematic substrates, such as Underfloor Heating, Heavily Trafficked Floors and Bitumen, specify BAL Level Plus as a 2-part leveller. If bigger bed depths are required – specify BAL Level Plus with BAL Course Aggregate to go up to 30mm bed depths.

• USE FOR:
  – Preparing floors for tiling

  AS A 1-PART MIX WITH WATER OVER:
  – Concrete
  – Sand:Cement Screeds
  – Anhydrite Screeds
  – Cementitious flowing screeds
  – Unglazed tiles / stone
  – Old Tile Adhesive Residues
  – Use from 2-12mm (up to 30mm with aggregate)

  AS A 2-PART MIX WITH BAL LEVEL PLUS LIQUID:
  – Underfloor heating / heated screeds
  – Asphalt (flooring grade)
  – Existing vinyl tiles (not LVT)
  – Flooring grade bitumen and residues
  – Direc on glazed Ceramic Tiles
  – Under a Damp Proof Membrane (DPM)
  – Use from 2-10mm (up to 30mm with aggregate)

  MAY BE TILED AFTER 2-3 HOURS
  
  CAN BE SPIKE ROLLED

  • 

  • Technical Datasheet
  • Material Safety Data Sheet - Powder
  • Material Safety Datasheet - Liquid
  • Declaration of Performance

  TYPICAL COVERAGE AT 3MM THICKNESS (per pack):

  		1-PART WITH WATER	2-PART WITH LATEX
  SIZE:	20kg	4m2	4m2