Single Part Fastflex
One-part elastomeric tile adhesive for walls and floors
-
Featuring sound-reduction properties, BAL Single Part Fastflex is highly flexible and can also be utilised as isolating, anti-fracture underlay for ceramic tiles. Recommended for areas subject to limited movement and vibration, BAL Single Part Fastflex is water/frost resistant and is suitable for fixing ceramics, porcelain and vitrified tiles, mosaics, slate and certain natural stones including marble, terrazzo in dry or wet interior and exterior environments.
Looking for sound-reduced floors? Then ask your tiler for BAL Single Part Fastflex, which has been independently tested for its sound-reduction properties. Suitable for use with most types of tiles and certain natural stone, it helps meet Building Regulations for sound resistance. Please note this product is not suitable with BAL Rapid Mat, and when used on walls, battens will be required. Contact TAS for more information.
-
USE FOR:
Most types of FLOOR tiles including:- Ceramics
- Porcelain and fully vitrified tiles
- Mosaics
- Natural Stone including marble
- Slate
Most substrates including:
- Asphalt (suitable grade e.g. flooring)
- Concrete, cement:sand screeds and rendering
- Existing vinyl tiles, unglazed ceramic tiles, quarry tiles, terrazzo and natural stone
- Fibre reinforced cement boards and lightweight tile backer boards
- Tongued and grooved floorboards
- Underfloor heating
Other substrates that may be suitable include:
Single layers of chip / ply, floating timber floors, Steel, GRP, Epoxy coatings and glazed tilesPOT LIFE AT 20C: 45 Minutes
GROUT AFTER: 5 hours
COLOUR: Grey and White (12.5kg)
CLASSIFICATION: BS EN 12004 C1S2TYPICAL COVERAGE (per pack): THICK BED SOLID BED TROWEL LARGE FORMAT TROWEL SOLID BED TIPPED TROWEL SIZE: 12.5kg 6.5m² 4.3m² 5.7m²
