BAL Waterproof 1C

The one-coat waterproofing solution

Technical Data
  • BAL Waterproof 1C is a ready-to-use, rapid-setting one coat waterproofing system for tiling in internal wet areas. Ready to tile after only 2 hours, Waterproof 1C can be applied with a brush, trowel or roller and no mixing is required! What’s more it can be used without priming on certain backgrounds, and provides crack bridging without tape on static cracks or board joints up to 3mm. Includes Fibre Strand Technology for improved strength.

    A quick-setting waterproofing solution for internal commercial wet areas. BAL Waterproof 1C provides 6m2 of coverage out of every tub. Complete protection against water ingress in only one coat! No need for excessive tapes or matting systems on most joints – except where movement may occur and between wall and floor. Where priming is required use BAL Primer 1C.

  • USE FOR:

    • flexible, seamless one-coat waterproofing before tiling
    • most substrates
    • dry/wet interior
    • showers, bathrooms, kitchens, laundry/utility rooms
    • around drainage channels, upstands, pipes and floor wastes
    • crack bridging 2-3mm

    MAY BE TILED AFTER: 2 hours

    COLOUR: Light Grey

    TYPICAL COVERAGE (per pack):
    with THICKNESS: 0.8mm / 1.6mm
    SIZE: 5ltr 6m² / 3m²