Single Part Fastflex

One-part elastomeric tile adhesive for floors and walls

Overview

Technical Data

Featuring sound-reduction properties, Single Part Fastflex is highly flexible and can also be utilised as isolating, anti-fracture underlay for ceramic tiles. Recommended for areas subject to limited movement and vibration, Single Part Fastflex is water/frost resistant and is suitable for fixing ceramics, porcelain and vitrified tiles, mosaics, slate and certain natural stones including marble, terrazzo in dry or wet interior and exterior environments.

This adhesive should be specified to help improve sound-reduction properties of floors and help achieve the requirements of Building Regulations Part E (Resistance to sound). Single Part Fastflex has been independently tested for its acoustic properties. When specifiying sound-reduction systems, please contact BAL Technical Advisory Service for support.
USE FOR:
Most types of FLOOR and WALL tiles including:
- Ceramics
- Porcelain and fully vitrified tiles
- Mosaics
- Natural Stone including marble
- Slate
Most substrates including:
- Asphalt (suitable grade e.g. flooring)
- Concrete, cement:sand screeds and rendering
- Existing vinyl tiles, unglazed ceramic tiles, quarry tiles, terrazzo and natural stone
- Fibre reinforced cement boards and lightweight tile backer boards
- Tongued and grooved floorboards
- Underfloor heating
Other substrates that may be suitable include:
Single layers of chip / ply, floating timber floors, Steel, Epoxy coatings and glazed tiles

POT LIFE AT 20C: 45 Minutes

GROUT AFTER: 5 hours

COLOUR: Grey and White (12.5kg)

CLASSIFICATION: BS EN 12004 C1S2
TYPICAL COVERAGE (per pack):

10mm NOTCHED TROWEL 20mm LARGE FORMAT TROWEL SOLID BED TIPPED TROWEL

SIZE: 12.5kg 6.5m² 4.3m² 5.7m²

		10mm NOTCHED TROWEL	20mm LARGE FORMAT TROWEL	SOLID BED TIPPED TROWEL
SIZE:	12.5kg	6.5m²	4.3m²	5.7m²

Single Part Fastflex

One-part elastomeric tile adhesive for floors and walls

You may also need: