BAL AF Max
Rubber-crumb adhesive that performs as an uncoupling and fixing system in one.
-
A unique rubber-crumb, high-yield tile adhesive that performs as an uncoupling and fixing system in one – removing the need for uncoupling mats on problematic floors. BAL AF Max has anti-fracture technology that absorbs lateral stress movement from the floor protecting tiles from failures. With BAL AF Max get up to 8.5m2 per bag, meaning only 4 bags are needed for a 30m2 area.
Specify BAL AF Max where an uncoupling system is needed. Saves the fixer time, money and materials compared with a traditional uncoupling system: 40% lower cost, 70% time saving and 70% less materials compared with alternate fixed uncoupling mat system and required adhesive. Use over most substrates plus asphalt, bitumen, plywood overlays and steel.
New BAL red 30ltr mixing buckets now available – perfect for this high-yield, high-volume product.
-
USE FOR:
Most types of FLOOR and WALL tiles including:- Ceramics
- Porcelain and fully vitrified tiles
- Mosaics
- Natural Stone including marble
- Slate
Most substrates including:
- Asphalt (suitable grade e.g. flooring)
- Bitumen adhesive residues
- Concrete, cement:sand screeds and rendering
- Anhydrite Screeds
- Existing vinyl tiles, unglazed ceramic tiles, quarry tiles, terrazzo and natural stone
- Fibre reinforced cement boards and lightweight tile backer boards
- Tongued and grooved floorboards, plywood overlay
- Underfloor heating
- Existing thermoplastic vinyl tiles
Other substrates that may be suitable include:
Steel, GRP (internal dry), Epoxy coatingsPOT LIFE AT 20C: 45 Minutes
GROUT AFTER: 5 hours
COLOUR: GreyPACK SIZE: 17kg (7.4 – 8.5m2)
CLASSIFICATION: BS EN 12004 C1S2TYPICAL COVERAGE (per pack): Trowel Size Mixed Adhesive m2 m2 per 17kg bag 10 x 20mm Round Notched 3.1 7.4 10 x 10mm Square Notched 2.8 8.5
