Tank-it

BAL Tank-it is the ultimate waterproofing kit providing complete protection in any environment. It is suitable for use internally or externally to waterproof areas prior to tiling. Rapid-setting, BAL Tank-it can be tiled after only 90 minutes for fast-track project completion – what’s more no priming or matting is required. Available in a simple two-part mix (plus scrim tape), BAL Tank-it is easy to use and will fully seal walls and floors of total immersion areas such as pools, fountains, spas , balconies and terraces (an approved design required).

For complete waterproofing protection for internal or external project choose BAL Tank-it. Rapid drying and easy to use, Tank-it can be tiled in only 90 minutes ensure fast-track project completion. Suitable for almost any environment, BAL Tank-it fully seals walls and floors protecting against harmful water penetration. Available to purchase in a simple two-part mix (plus scrim tape), BAL Tank-it comes with FREE technical backup, product support and a 25 year guarantee for complete peace of mind.

Level Max

The maximum performance, all-in-one floor leveller with Fibre Strand Technology (FST). BAL Level Max has a maximum bed depth up to 80mm in a single application – the largest in the market. It is suitable for use over timber at 3mm, accepts foot traffic in three hours and can be tiled after only four hours at any depth saving significant project time and reducing costs.

For the ultimate floor leveller, ask your tiler for BAL Level Max – providing maximum performance  to ensure your flooring project lasts the test of time. Suitable for domestic or commercial projects, BAL Level Max outperforms competitors in strength, flexibility, shrinkage and bond strength.  What’s more, with a 25 year guarantee, you can rest in peace that BAL Level Max won’t let you down.

Rapid-Mat

BAL Rapid-Mat is an innovative fast-track uncoupling system to accommodate lateral movement for tile installations on floors with limited movement. Reducing adhesive consumption relative to other systems and with minimal mat compression, BAL Rapid-Mat is lightweight and easy to install, with minimal height build-up with only 1mm thickness. BAL Rapid-Mat is suitable for internal flooring, renovation and new construction, domestic and commercial areas in medium/heavy duty applications. It is particularly recommended for heated floors and timber floors.

BAL Rapid-Mat provides the ultimate fail-safe for floor tiling projects, helping to protect against lateral movement, while using 20% less adhesive when compared to using a cavity mat system saving you and your tiler costs and time on your tiling project. Suitable for problematic floors, Rapid Mat protects against cracks, fractures and other damage and is ideal for use as a protective layer on top of underfloor heating, timber substrates and other challenging backgrounds.

 

Acrybase

A fast-hardening two-part (powder and liquid) self-smoothing compound suitable for laying on absorbent and non-absorbent substrates to prepare floor surfaces for installing ceramics, natural stone, sheet and soft furnishing in dry or wet interior and exterior enviornments. Recommended for heavily-trafficked areas and exterior floors BAL Acrybase can be laid at bed depths from a feather edge up to 10mmm and from 10mm to 20mm with the addition of 3mm granite chippings.

Ask your tiler whether he’s using BAL Acrybase for the quick installation of your tiling project. A high performance leveller, BAL Acrybase has high strength properties making it perfect for internal or external use. What’s more it’s formulation means its perfect for key projects including swimming pools and those with underfloor heating. A true multi-purpose product, BAL Acrybase is perfect for levelling areas prior to the installation of most tile types.

Waterproof Plus

BAL Waterproof Plus provides a complete waterproofing kit for the protection of substrates (when used as part of a tanking system) prior to the installation of wall and floor tiles in dry or wet interior or exterior environments. The kit will fully seal walls and floors with an approved design for showers, wet rooms, swimming,hydrotherapy and spa pools, fountains, water features, terraces and balconies. Includes a two-part quick drying cementitious coating product, scrim tape and applicator tool.

BAL Waterproof Plus provides the complete waterproofing kit in one bucket. Providing complete waterproof protection for internal and external areas, Waterproof Plus is rapid-setting and can be tiled after two hours. Suitable for domestic and commercial projects, Waterproof Plus is easy to use and has no weight restriction from the use of the product, with the weight allowance dependent on the background or substrate.

Only available at Topps Tiles

Waterproofing Kit

A waterproof protection system for walls and floors, BAL Waterproofing Kit provides complete protection of substrates (when used as part of a tanking system) prior to the installation of wall and floor tiles in dry or wet interior environments. Not suitable for exterior use or total immersion, it is recommended for showers, bathrooms, kitchens and laundry/utility room. Includes acrylic-based primer and coating, with polyester tape and matting.

BAL Waterproofing Kit provides the complete solution when installing showers or wetrooms. While not suitable for exterior use or for areas of total immersion, the Waterproofing Kit can be used on most backgrounds and bases. Temperature resistant from -30C to 100C, the waterproof coating is pourable and easy to apply offering significant time savings.

WP1 Coating

BAL WP1 coating provides flexible and seamless waterproofing before tiling in showers, bathrooms, kitchens and laundry/utility rooms. BAL WP1 coating sets in 24 hours and is suitable for use on most substrates in dry or wet interior areas, including areas where movement may occur such as drainage channels, upstands, pipes and floor wastes. If required it may be reinforced with polyester matting and tape.

If you’re installing a shower or wet room then it is important to make the background waterproof by using a tanking system. When used as part of a suitable system, WP1 coating provides complete waterproof protection. Recommended in the home, WP1 is suitable for areas where movement may occur and for preventing water penetration through suspended floors.

Quickset Cement

A fast-setting, rapid-strength, low shrinkage cement for use in screeds and renders, BAL Quickset Cement accepts foot traffic in just three hours and is suitable for installations such as swimming pools or underfloor heating. It has a number of benefits including a 60 minute pot life, and 80% less shrinkage than a standard OPC screed. BAL Quickset Cement is water/frost resistant when set and can be pumped for fast track installation.

BAL Quickset Cement provides outstanding performance as a fast-track screed for indoor or outdoor projects. Accepting foot traffic in only three hours, BAL Quickset Cement allows significant time savings to be made on key installations compared with traditional cement screeds, for example three weeks on swimming pools or 15 days for underfloor heating. As well as offering outstanding performance, BAL Quickset Cement comes with a 25 year guarantee.

Quickset Render

A pre-mixed rapid-setting polymer-modified cement:sand render mortar, BAL Quickset Render sets in only two hours at bed depth of 2 – 20mm. Suitable for preparing wall surfaces for installing ceramics or natural stone in dry or wet interior or exterior environments, it is also suitable as a patch repair motar. This product can be used on backgrounds including concrete, brickwork, blockwork, lightweight concrete blocks, glazed tiles and plaster surfaces.

If you or your tradesman is looking for a rapid-setting render to prepare walls prior to tiling then look no further than BAL Quickset Render. Unlike other renders, Quickset Render is ready-mixed and sets in only two hours, ensuring that jobs can be finished in hours rather than days, saving you time and money. With a pot-life of 30 minutes, Quickset Cement can also be used as a spot-repair mortar for external and internal damage.

Prime APD

BAL Prime APD is a rapid-drying acrylic primer suitable for priming wall and floor backgrounds prior to the fixing of ceramics, mosiacs and natural stone tiles in dry or wet interior and exterior environments. BAL Prime APD stabalises dusty surfaces and reduces the porosity of backgrounds and may be used undiluted on plaster walls and plasterboard, tongue and groove floorboards and anhydrite screed floors. Use diluted on plaster walls (if dusty or porous) and cement floors.

BAL Prime APD helps stabilise backgrounds prior to tiling in ultra-quick time, allowing for tiles to be fixed with a suitable adhesive in 15-30 minute and producing significant cost and time savings for your project. BAL Prime APD is suitable for a variety of projects including walls and floors, worktops, showers, heated screeds and areas with some movement or vibration.

BAL Primer

BAL Primer is a rapid-drying acrylic primer suitable for priming wall and floor backgrounds prior to the fixing of ceramics, mosiacs and natural stone tiles in dry or wet interior and exterior environments. BAL Primer stabalises dusty surfaces and reduces the porosity of backgrounds and may be used undiluted on plaster walls and plasterboard, tongue and groove floorboards and anhydrite screed floors. Use diluted on plaster walls (if dusty or porous) and cement floors.

BAL Primer helps stabilise backgrounds prior to tiling in ultra-quick time, allowing for tiles to be fixed with a suitable adhesive in 15-30 minute and producing significant cost and time savings for your project. BAL Primer is suitable for a variety of projects including walls and floors, worktops, showers, heated screeds and areas with some movement or vibration.

Only available at Topps Tiles

Bond SBR

A multi-use synthetic polymer primer and admixture, BAL Bond SBR can be used as a bonding agent for adding to mortars used in screeding, plaster, rendering, bricklaying, pointing and repairs and as a primer for tile fixing onto timber, plaster, screeds, rendering or vinyl tiles. BAL Bond SBR is suitable for swimming pools and as a slurry coat of cement or plaster mix for wall and floor backgrounds.

A multi-purpose bonding agent and primer, BAL Bond SBR enhances the physical properties of mortars and helps prime background prior to tiling, leading to significant project savings in time and cost.Bond SBR is suitable for swimming pools and as a slurry coat of cement or plaster mix for wall and floor backgrounds.

Admix AD1

A water-based polymer additive for cementitious walls and floor adhesives, BAL Admix AD1 improves adhesion and flexibility, enhancing physical properties and performance. Suitable for use with BAL CTF4, BAL Rapidset and BAL Supercover Rapidset. Not suitable for use with highly polymer-modified cementitious adhesives and ready-mixed products.

 

 

Admix GT1

A water-based polymer additive for cementitious walls and floor grouts, BAL Admix GT1 improves grout flexibility, physical properties and performance and is ideal for use with porcelain tiles. Suitable for use with BAL Grout, and Wide Joint Grout. Not suitable for use with highly polymer-modified cementitious adhesives and ready-mixed products.

BAL Admix GT1 is the perfect product to help improve the performance of cementitious BAL wall and floor grouts. Available in handy 2.5 litre and 1 litre bottles, Admix GT1 provides added flexibility and is perfect to add to grouts for use in projects including showers, swimming pools, heated screeds and areas with limited movement or vibration.

White Star Plus

Newly formulated with our advanced Fibre Strand Technology (FST), BAL White Star Plus is a ready-mixed adhesive for walls. Highly flexible and non-slip BAL White Star Plus is water-resistant and suitable for fixing certain ceramics, mosiacs and porcelain tiles and some natural stone in dry or wet interior environments. Ready to use and easy to apply, it offers extended open-time of more than 30 mins, higher grab and higher bond strength.

BAL White Star Plus is one of the leading ready-mixed wall tile adhesive on the market, exceeding British and European standards. BAL White Star Plus offers excellent properties for the user including high bond-strength, excellent non-slip qualities, and light weight rheology for easier and faster application. BAL White Star Plus comes in an enhanced white colour and can be grouted after 24 hours, making it perfect for domestic tiling projects including kitchens, splashbacks, bathrooms and showers.

Blue Star

BAL Blue Star is a non-slip ready to use tile adhesive for walls. Easy to apply and offering high grab and high bond strength, BAL Blue Star is suitable for fixing ceramics (up to 300x300mm), mosiacs and some natural stone in dry and wet interior environments and can be used for domestic areas, such as showers, kitchens and bathrooms and heavy duty communal dry areas.

Ready to use and easy to apply, BAL Blue Star has excellent non-slip capability, meaning no battens are required when fixing onto walls. Coming in handy tubs of 10ltr, 5ltr and 1ltr, BAL Blue Star is perfect for domestic wet areas such as kitchens, bathrooms, splashbacks and showers. BAL Blue Star is suitable for most backgrounds including rendering, clay brick, sheets and board, plasterboard, plaster, tile backer board, glazed tile & brick and painted surface.

Green Star

BAL Green Star is a ready to use and easy to apply tile adhesive for walls. Suitable for fixing ceramics, mosiacs and some natural stone in dry or wet interior environments, it can also be used for domestic areas including showers, kitchens and bathrooms. BAL Green Star offers extended open time of 30 mins and can be grouted after 24 hours.

A simple, but effective ready-mixed tile adhesive, BAL Green Star is perfect for fixing ceramics up to 300mm by 300mm, mosiacs and natural stone. Ready-to-use straight from the tub with no mixing required, BAL Green Star provides numerous benefits including excellent non-slip properties and extended open time for fixing larger areas such as kitchens and bathrooms.

Tile & Grout

BAL Tile & Grout is a ready-to-use all-in-one adhesive and grout for walls. Non-slip with high bond strength, BAL Tile & Grout is perfect for fixing ceramics (up to 300x300mm), mosiacs and some natural stone in dry and wet interior environments. Suitable for domestic areas including showers (not power showers), kitchens and bathrooms, BAL Tile & Grout can also be used for heavy duty wet areas including communal showers and commercial kitchens.

If you’re looking for an all-in-one tile adhesive and grout for your wall tiling project, then look no further than BAL Tile & Grout. This ready-mixed product provides users with a number of benefits including an easy-to-use formulation with improved characteristics including extended open time for longer working. Please note that BAL Tile & Grout is not suitable for areas of total immersion, and non-pourous tiles, or as a grout for power showers.

Max-Flex Fibre

Standard setting and highly flexible, BAL Max Flex Fibre has been developed with our Fibre Strand Technology for improved flexibility and strength. With and extended open time of more than 40 minutes and a pot life of five hours, BAL Max Flex Fibre is suitable for use fixing most tile types (except natural stone). BAL Max Flex Fibre is recommended for large format wall tiles, areas of total immersion, heated screeds and plywood walls. Also suitable for installations subject to limited movement and vibration and for tiling on existing glazed ceramic tiles.

Formulated with lightweight rheology, BAL Max-Flex Fibre offers outstanding benefits helping you or your fixer get the job done easily and efficiently. Easy to mix and spread, it’s extended open time allows for a greater area to be fixed in one mix. Available in white and grey, BAL Max-Flex Fibre comes in pack sized of 20kg, 10kg and 5kg (20kg only in Grey). For use on walls and floors, it can be grouted in 16 hours.

Single Part Flexible

BAL Single Part Flexible is a highly flexible, standard-setting tile adhesive for walls and floors, offering users an extended open time of 30 minutes and pot life of five hours. BAL Single Part Flexible is recommended for fixing most types of tile, large format wall tile and areas of total immersion in water such as swimming pools and showers. It is also suitable for installations subject to limited movement and vibration, and heated screeds.

BAL Single Part Flexible is the perfect tile adhesive for use on difficult floors where flexibility is required such as underfloor heating and areas where there is movement. Standard setting, BAL Single Part Flexible has a number of benefits to aid fixing including extended open time and pot life for longer working. BAL Single Part Flexible can be grouted in 16 hours and is developed with PorcelBond technology for use with porcelain.

CTF4

Developed over more than 50 years, BAL CTF4 is a standard-setting, polymer-modified cementitious tile adhesive for walls and floors. Offering extended open time of 30 minutes, and pot life of five hours, BAL CTF4 is suitable for fixing ceramics, porcelain andvitrified tiles, mosaics, certain natural stones, terrazzo, rigid foam insulating materials and brick slips in dry or wet interior and exterior environments. Recommended for large format wall tiles and showers, BAL CTF4 is highly water and frost resistant.

Formulated over many years with a trusted heritage, BAL CTF4 is polymer-modified producing improved characteristics for your fixer. Suitable for bed thickness from 2mm to 6mm, BAL CTF4 can be grouted after 16 hours. Available in white, BAL CTF4 is suitable for most backgrounds, except floors subject to lateral movement or vibration such as underfloor heating or timber.

Wall & Floor Professional

BAL Wall & Floor Professional is a standard-setting, cementitious tile adhesives for walls and floors. Suitable for most tile types, including porcelain, BAL Wall & Floor Professional is non slip, frost resistant and can be used for interior or exteriors. Suitable for grouting after 16 hours, BAL Wall & Floor Professional has good bond strength and achieves coverage of 6.6m² for walls and 5m² for floors.

BAL Wall & Floor Professional is perfect for your internal or external tiling project, particularly showers and areas with large format tiles. BAL Wall & Floor Professional is perfect for use with ceramic, porcelain and vitrified tiles, mosiacs, certain natural stones, terrazzo, rigid foam insulating materials and brick slips. Available in Grey, BAL Wall & Floor Professional can be grouted after 16 hours, has good bond strength and achieves coverage of 6.6m² for walls and 5m² for floors.

Only available at Topps Tiles

Rapidset Flexible Fibre

Enhanced with BAL Fibre Strand Technology (FST) for improved flexibility and strength, BAL Rapidset Flexible Fibre can be grouted after only three hours, and provides extended open time of 30 minutes and working time of 60 minutes. For use on interior or exterior floors and walls to fix most tiles types, most natural stone, terrazzo, rigid foam insulating materials and brick slips, BAL Rapidset Flexible Fibre has a smoother consistency for easier mixing and application.

Consider BAL Rapidset Flexible for fast-track tiling projects with difficult or specialist backgrounds which require increased flexibility which helps to prevent tile cracking or de-bonding. With a drying time of only three hours, tiling can be completed faster, ensuring the project is completed on time and in budget. BAL Rapidset Flexible has enhanced adhesion properties, making it suitable for use with fully vitrified or porcelain tiles and low porosity substrates.

Rapid-Flex Fibre Plus

BAL Rapid-Flex Fibre Plus is a non-slip cementitious tile adhesive for walls and floors formulated with BAL Fibre Strand Technology (FST) for improved flexibility, strength and grab. Fast-setting in three hours, it provides extended open time of 30 minutes and pot life of 60 minutes, and is formulated for easier mixing and application. A high polymer content allows for tiling direct onto plywood walls, while it is recommended for large format tiles, areas of total immersion, limited movement and heated screeds.

Only available at Topps Tiles

Rapidset Flexible

Polymer-modfied and water-frost resistant, BAL Rapidset Flexible sets in only three hours making it ideal for fast-track tiling on walls or floors. Recommended for areas of total immersion, heated screeds and installations subject to limited movement and vibration, BAL Rapidset Flexible can be used to fix ceramics, porcelain and vitrified tiles, mosaics, natural stone including marble (excluding translucent), terrazzo, rigid foam insulating materials and brick slips in dry or wet interior and exterior environments.

Consider BAL Rapidset Flexible for fast-track tiling projects with difficult or specialist backgrounds which require increased flexibility which helps to prevent tile cracking or de-bonding. With a drying time of only three hours, tiling can be completed faster, ensuring the project is completed on time and in budget. BAL Rapidset Flexible has enhanced adhesion properties, making it suitable for use with fully vitrified or porcelain tiles and low porosity substrates.

Turbo Set

BAL Turbo Set allows fast track completion of projects with the ability to grout tiles after just 30 minutes. With a working time of 15 minutes, conditions dependent,BAL Turbo Set is ideal to finish your last 1-2m² of tiling to a allow for same day grouting or to fast-track minor repairs. BAL Turbo Set is flexible and suitable for most backgrounds, areas of total immersion, heated screeds and installations subject to limited movement or vibration.

An ultra-rapid setting adhesive, BAL Turbo Set is perfect to complete projects in super-quick time. Turbo Set is extremely versatile and can be used for the quick completion of jobs when fixing ceramics, porcelain and vitrified tiles, mosiacs, mosttypes of natural stone (excluding translucent), terrazzo and granite, rigid foam materials and even brick slips. BAL Turbo Set is perfect for dry or wet interior and exterior environments.

Only available at Topps Tiles

Supercover Rapid Flex

BAL Supercover Rapid Flex is a rapid-setting, highly flexible tile adhesive for walls and floors and provides a higher yield for further coverage per bag. Available in grey and white, BAL Supercover Rapid Flex is suitable for fixing ceramics, porcelain and vitrified tiles, mosaics, certain natural stones, terrazzo, rigid foam insulating materials and brick slips in dry or wet interior and exterior environments. Also recommended for large format wall tiles, areas of total immersion, installations with limited movement/vibration and heated screeds.

BAL Supercover Rapid Flex is perfect for large walls and floor tiling projects where high yield and quick drying capabilities are required. As well as setting in only three hours, it is highly flexible, meaning it is perfect for use on difficult backgrounds which may be subject to total immersion (such as swimming pools), lateral movement (such as heated screeds) or vibration. Typical coverage on a dry wall and mosaic trowel is 1m² per kg, meaning you get more for your money and get the job done in double-quick time.

Supercover Rapidset

A cementitious non-slip wall and floor adhesive, BAL Supercover Rapidset provides outstanding yield and sets in double quick-time – suitable for grouting after only two hours. Providing an extended open time of 20 minutes and pot life of 45 minutes, BAL Supercover Rapidset is suitable for fixing ceramics, porcelain and vitrified tiles, mosaics, certain natural stones, terrazzo, rigid foam insulating materials and brick slips in dry or wet interior and exterior environments. Also recommended for large format wall tiles and showers.

Homeowners should consider BAL Supercover Rapidset for large projects which require completion in double-quick time. Providing a high yield and quick drying capabilities, BAL Supercover Rapidset is suitable for walls and floors and can be applied to most backgrounds or bases included heated screeds, areas of total immersion and limited movement/vibration when modified with BAL ADMIX AD1 and/or used with BAL RAPID MAT. What’s more BAL Supercover Rapidset is suitable for most tile types, except natural stone susceptible to water staining.

Rapidset

BAL Rapidset is a long-standing and trusted wall and floor adhesive with rapid-setting and reduced slip properties. Setting in only two hours, BAL Rapidset features a pot life of 30-45 minutes and is suitable for fixing ceramics, porcelain and vitrified tiles, mosaics, certain natural stones, terrazzo, rigid foam insulating materials and brick slips in dry or wet interior and exterior environments. Available in grey and white, BAL Rapidset is highly water and frost resistant.

Looking for your project to be completed in ultra-quick time? Then make sure you’re using BAL Rapidset as the adhesive of choice for your wall or floor tiling. Thanks to its formulation, BAL Rapidset can be grouted in only two hours, reducing your labour and material costs substantially. BAL Rapidset is suitable for most domestic or commercial projects but not areas of total immersion, heated screeds or limited movement/vibration unless modified with BAL ADMIX AD1 for extra flexibility.

Only available in Topps Tiles

Stone & Tile PTB

A pourable tile adhesive for floors, BAL Stone & Tile PTB is perfect for fixing large and small format ceramics, porcelain and vitrified tiles, most natural stones, terrazzo in dry or wet interior and exterior environments. Rapid-setting in three hours and highly flexible, it can be used up to 25mm bed thickness in one application and is ideal for patch repair. BAL Stone & Tile PTB is ideal for underfloor and undertile heating, areas of total immersion, heated screeds and installations subject to limited movement and vibration.

BAL Stone & Tile PTB provides the perfect answer when installing large format natural stone and tiles onto internal or external backgrounds. Stone & Tile PTB is perfect for most types of substrates and is especially recommended for tiles/slabs of uneven thickness such as slate, and difficult backgrounds which may cause traditional adhesive to crack or de-bond from the tile. Available in grey and white, BAL Stone & Tile PTB sets in three hours, whether 3mm or 25 mm thick thanks to its rapid-setting formulation.

PTB Fibre Plus

A pourable tile adhesive for floors, BAL PTB Fibre Plus offers improved strength, flexibility and performance thanks to its Fibre Strand Technology (FST) formulation. Ideal for most tile types, especially large format and natural stone tiles, including those of uneven thickness, it is suitable for most installations even swimming pools and wet rooms. It’s versatility means it can even be used on timber floors, over under tile heating systems and other substrates subject to limited movement and vibration.

BAL PTB Fibre Plus is recommended for floor tiling projects using large format and natural stone tiles where fast-track installation is required. BAL PTB Fibre Plus sets in only three hours, and it’s flexibility and strength makes it perfect for areas where high traffic or limited movement may cause tiles to crack or de-bond when used with a traditional tile adhesive. BAL PTB Fibre Plus can be used with ceramic, porcelain, terrazzo and natural stone including transluscent stone.

Only available at Topps Tiles

Single Part Fastflex

Featuring sound-reduction properties, BAL Single Part Fastflex is highly flexible and can also be utilised as isolating, anti-fracture underlay for ceramic tiles. Recommended for areas subject to limited movement and vibration, BAL Single Part Fastflex is water/frost resistant and is suitable for fixing ceramics, porcelain and vitrified tiles, mosaics, slate and certain natural stones including marble, terrazzo in dry or wet interior and exterior environments.

Looking for sound-reduced floors? Then ask your tiler for BAL Single Part Fastflex, which has been independently tested for its sound-reduction properties. Suitable for use with most types of tiles and certain natural stone, it helps meet Building Regulations for sound resistance. Please note this product is not suitable with BAL Rapid Mat, and when used on walls, battens will be required. Contact TAS for more information.

Easypoxy AG

Chemical-resistant and solvent free, BAL Easypoxy AG is a high strength epoxy adhesive and grout suitable for walls and floors. Durable and abrasion-resistant, it provides an excellent set in 24hours with full cure at seven days. Its use is recommended for food preparation areas where a hygienic, easily cleaned surface is required. BAL Easypoxy AG is recommended for; domestic kitchens and worktops, breweries, abattoirs, dairies, swimming and hydro therapy pools, bathrooms, showers and power showers, hospital and industrial/chemical plants.

Easypoxy AG provides a two-in-one adhesive and grout solution that is perfect for hygiene critical environments where additional chemical resistance is required. Easypoxy AG is waterproof and crucially does not permit the entry of bacteria or dirt. As a two-in-one product, Easypoxy AG produces significant time and cost savings for your project. White in colour, the product is perfect for ceramics, porcelain and fully vitrified tiles, mosaics and glass or translucent tiles including glass mosaics.

Total Bond

BALTotal Bond provides a number of benefits for the user. Extremely versatile with high initial tack and bond strength, BAL Total Bond is extremely flexible and can be used to seal movement joints in domestic installations. Suitable for most surfaces, BAL Total Bond can be used in dry and intermittent wet environments and can be over-painted. The complete construction adhesive and sealant.

BAL Total Bond is perfect for use as a super-strength adhesive for fitting bathroom accessories and bonding most construction materials including glass, metal, PVC, acrylic or wood materials for wall and floor installations and for the fixing of mirrors (excluding plastic type safety backed mirrors) to suitable backgrounfd. Unaffected by weather or UV radiations, Total Bond can be over-painted and used in dry and wet environments.

Only available at Topps Tiles

Micromax2

Rapid-setting and highly flexible, BAL Micromax2 is formulated with built-in Microban antimicrobial protection for walls and floors. Suitable for joint widths from 1mm to 20mm, BAL Micromax2 sets in two to three hours, enabling faster completion. An efflorescence-free formulation minimises risk of patchy discolouration. A built in admixture ensures a clean and even finish for grout joints. Available in White, Manilla, Gunmetal, Pebble, Jasmine, Ebony, Smoke, Chocolate, Cocoa and Anthracite. For large projects, additional colours are available upon request.

Designed with the homeowner in mind, Micromax2 ticks all the boxes for a flexible grout providing all-round protection against mildew and black mould. Setting in only 2-3 hours, Micromax2 is recommended for domestic and commercial installations due to its enhanced durability , making it suitable for power showers, wet rooms, heated floors and timber screeds. Micromax2 can be used for grouting porcelain, glazed and fully vitrified tiles, glass and ceramic mosiacs, marble and natural stone in interior or exterior environments.

NOW AVAILABLE: Micromax2 mortar inspired grout colours. A collection of authentic colours inspired by traditional mortars, exclusive to Topps Tiles. The range features all of the benefits of Micromax2 and is available in four colours: Lime, Clay, Cement and Ash. Colour-matched Micromax Sealants also available.

Microflex

BAL Microflex is a highly flexible grout suitable for joints up to 5mm. Formulated with built-in Microban antimicrobial protection for walls, BAL Microflex is water and frost-resistant and offers high bond strength. Recommended for swimming pools and power showers, BAL Microflex can also be used on some floors depending on tile type, area and traffic. Not suitable for food preparation, storage areas, spas, Jacuzzis, chemical plants, power showers with body jets and areas requiring waterproof grouting.

A highly flexible grout, Microflex offers homeowner and fixer improved characteristics for grouting porcelain, glazed and fully vitrified tiles, glass and ceramic mosiacs, marble and natural stone in dry and wet environments. Available in white and ivory, Microflex comes in handy pack sizes of 10kg and 3.5kg. Its highly flexible nature makes it perfect for areas of limited movement/vibration and total immersion. Microflex is suitable for use with porcelain, glazed and fully vitrified tiles, glass and ceramic mosiacs, marble and natural stone in dry and wet environments.

Superflex

Highly flexible and water/frost-resistant, BAL Superflex is suitable for grouting wall tiles with joints up to 5mm. Recommended for swimming pools, power showers and areas of limited movement, BAL Superflex has a built-in admixture for increased flexibility and high bond strength at the edges of tiles or mosiacs. Please note this product is not suitable for food preparation/storage areas and areas requiring waterproof grouting.

BAL Superflex grout is perfect for grouting porcelain, glazed and fully-vitrified tiles, glass and ceramic mosiacs, marble and natural stone tiles with joint widths up to 5mm. Superflex is highly flexible enabling it to withstand heavy use, vibration and movement. Available in white and ivory, Superflex comes in pack sized of 10kg and 3.5kg and achieves typical coverage of 6.08m² per kg for 200x200x6mm tiles with joint width of 2mm.

Superflex Wide Joint

For use on walls and floors, BAL Superflex Wide Joint is perfect for grouting porcelain, glazed and fully vitrified tiles, glass and ceramic mosaics, marble and natural stone in dry or wet interior and exterior environments. BAL Superflex Wide Joint is perfect to use for joints up to 3mm to 20mm and is recommended for swimming pools and for limited movement areas including overlaid plywood floors (minimum 15mm) and heated screeds

If your tiling project has super-wide joints, then ensure your tiler is using BAL Superflex Wide Joint. Perfect for domestic applications, it comes in six handy colours for your project including white, ivory, grey, charcoal, limestone and sandstone. BAL Superflex Wide Joint is suitable for use either internally or externally and comes in pack sized of 10kg and 3.5kg.
.

BAL Grout

A classic tile grout, BAL Grout is water and frost resistant and can be used for joint widths up to 3mm. Suitable for grouting ceramics and mosiacs in dry or wet interior and exterior environments, BAL Grout is receommended for swimming pools. Further applications are possible by adding BAL Admix GT1 to provide flexibility, increased adhesion and high bond strength. Available in white, ivory and grey.

BAL Grout is perfect for domestic tiling projects where cost savings are essential. Curing in 24 hours, it is suitable for use with ceramics and mosiacs, and provides excellent coverage.While not suitable for food preparation areas, power showers and areas requiring waterproof grouting, BAL Grout is suitable for large scale projects including swimming pools, areas of movement/vibration and heavily trafficked floors when used with BAL Admix GT1.

Wide Joint

BAL Wide Joint is a water and frost resistant cementitious tile grout for walls and floors and is suitable for joint widths from 2mm to 12mm. Suitable for grouting ceramics, mosiacs and natural stone/quarry tiles, in dry or wet interior and exterior environments, BAL Wide Joint comes in four colours: ivory, grey, limestone, and sandstone. While recommended for swimming pools, Wide Joint is not suitable for power showers, food preparation/storage areas and areas requiring waterproof grouting.

Consider BAL Wide Joint for floor and wall tile projects with wide joints. BAL Wide Joint is perfect for swimming pools, areas of movement and heavily trafficked floors and is suitable for domestic and commercial projects. Curing in 24 hours, BAL Wide Joint comes in 10kg and 3.5kg packs, and further applications are possible by adding BAL Admix GT1 to provide flexibility, increased adhesion and reduced water permeability.

Floor Epoxy

BAL Floor Epoxy is a three-part hygenic impervious epoxy resin tile grout for floors. For joint widths up to 20mm, BAL Floor Epoxy is recommended for large installations including food preparation/processing plants, swimming pools/sports and leisure centres, shopping malls/supermarkets, hospitals and industrial/chemical plants. It is also suitable as a tile adhesive for chemical plants with metallic backgrounds, and for areas requiring chemical resistance.

Hard-wearing and offering high resistance to abrasion and impact, Floor Epoxy also provides high protection against bacteria and chemical attack. Suitable for most tile types and curing in 24 hours, Floor Epoxy is recommended for large-scale projects where chemical protection is required. A pot life of 60 minutes produces cost and time savings for fixer and homeowners, as fewer mixes are needed per project.

Micromax sealant

BAL Micromax Sealant is a unique high performance ready to use silicone sealant with built-in Microban® antimicrobial protection for walls and floors. Waterproof and providing excellent adhesion, BAL Micromax Sealant is perfect for sealing movement joints in floor and wall installations. Suitable for surfaces including sanitary, acrylic, fibreglass, glass, glazed, porcelain and painted in dry and wet interior and exterior environments.

Formulated with you in mind, BAL Micromax sealant is the perfect finishing product for your project. Colour-matched with our Micromax2 grout, Micromax sealant offers excellent bond unaffected by weathering, UV radiation and immersion in water. With built-in anti-microbial protection it is also protected against black mould, mildew and bacteria and is perfect for any environment.

Silicone

A waterproof ready-to-use sealant, BAL Silicone provides firm bonding for use sealing movement joints in floor and wall tiling installations. For use on surfaces including acrylic, ceramic, fibreglass, glass, porcelain in dry or wet interiors and exteriors, BAL Silicone is suitable for domestic and light commercial applications.

An affordable and reliable silicone product, BAL Silicone is available in 310ml cartridges and white, cream and transparent colours . Curing in 24 hours (per 4mm thickness) BAL Silicone is perfect for showers, areas of movement and where chemical resistance is required. Application areas including breweries, leisure centres, domestic kitchens, bathrooms, restaurants and food production areas, kitchens and hospitals.

Protective Sealer

A water-based temporary protection for tiles, BAL Protective Sealer protects surfaces against discolouration when using pigmented grouts. For use with all BAL grouting products, it can be removed by washing-off after grouting.

By using BAL Protective Sealer you can ensure your expensive tiles remain protected throughout the grouting process. An essential for any projects, the use of BAL Protective Sealer removes any potential for regrouting or re-tiling which could add significant costs and time to your project.

Microshield Plus

An alkaline tile cleaner with Microban anti-microbial action, BAL Microshield Plus’ fast-action formula removes grease, dirt and stains from all types of wall and floor tile. Formulated to maintain tile joints with BAL grouting, BAL Microshield Plus leaves hygienically clean surfaces and helps inhibit growth of mildew and black mould, providing added hygiene protection for bathrooms, showers and food consumption areas.

Only available at Topps Tiles