Flexbone VAried

BAL Flexbone VAried is a high load-bearing, waterproof uncoupling membrane that accommodates lateral movement. A fast-track system, it can be used for a number of installations including heavy trafficked areas. Includes patented GripLock technology for greatest adhesive shear strength (50% better than other cavity mats) and unique bone structure enabling high flexibility and excellent deformability. High shear strength provides for higher levels of lateral movement. Special fleece provides for vapour pressure compensation.

Saving you time and money compared to other cavity mat systems, BAL Flexbone VAried needs less adhesive on the face of the mat, with circa 30% faster application! Because it is waterproof, it is perfect for use in wet areas and no additional tanking is needed. Perfect for high load bearing commercial projects such as shopping malls, airports, car showrooms, office buildings and hospitals.

Flexbone VAried

BAL Flexbone VAried is a high load-bearing, waterproof uncoupling membrane that accommodates lateral movement. A fast-track system, it can be used for a number of installations including heavy trafficked areas. Includes patented GripLock technology for greatest adhesive shear strength (50% better than other cavity mats) and unique bone structure enabling high flexibility and excellent deformability. High shear strength provides for higher levels of lateral movement. Special fleece provides for vapour pressure compensation.

Reduce project costs and time with BAL Flexbone VAried. Flexbone VAried needs less adhesive on the face of the mat compared to other cavity mat systems, and is easy to fill meaning a 30% time saving on this part of the application. High load bearing capacity makes it perfect for large scale commercial projects such as shopping malls, airports, car showrooms and office buildings where uncoupling is required.

Flexbone VAried

BAL Flexbone VAried is a high load-bearing, waterproof uncoupling membrane that accommodates lateral movement. A fast-track system, it can be used for a number of installations including heavy trafficked areas. Includes patented GripLock technology for greatest adhesive shear strength (50% better than other cavity mats) and unique bone structure enabling high flexibility and excellent deformability. High shear strength provides for higher levels of lateral movement. Special fleece provides for vapour pressure compensation.

Consider specifying BAL Flexbone VAried for high load bearing commercial projects where floors may be subject to lateral movement and stresses, such as underfloor heating, timber and new screeds. Faster application of adhesive compared to other cavity mat systems produces circa. 30% time savings. Perfect for shopping malls, airports, car showrooms, office building and hospitals.

Flexbone 2Easy

BAL Flexbone 2Easy is a unique floating uncoupling mat where no adhesive is needed underneath – a truly uncoupled system! Because it is floating, only basic preparation is needed – simply sweep solid, level floors and lay the mat. No remove of residue, bitumen or laitance. No priming needed. Tile immediately to contaminated, stained or cracked screeds and over bitumen. Fast-track tiling on new anhydrite and sand:cement screeds that aren’t cured as moisture evaporates through covering joints.

A game changing truly uncoupled mat system, BAL Flexbone 2Easy is perfect for rental properties, sensitive substrates in heritage project and retail projects as the mat does not need to be bonded – this means the tiled surface can be easily removed and replaced. A truly fast-track system as no preparation is needed on level and flat surfaces!

Flexbone 2Easy

BAL Flexbone 2Easy is a unique floating uncoupling mat where no adhesive is needed underneath – a truly uncoupled system! Because it is floating, only basic preparation is needed – simply sweep solid, level floors and lay the mat. No remove of residue, bitumen or laitance. No priming needed. Tile immediately to contaminated, stained or cracked screeds and over bitumen. Fast-track tiling on new anhydrite and sand:cement screeds that aren’t cured as moisture evaporates through covering joints.

BAL Flexbone 2Easy is a game-changing uncoupling system perfect for light commercial and domestic projects where preparing the surface will take time and cost money. Save 2kg/m2 on adhesive compared to bonded mats, plus save on primers and other preparation tools and equipment. Perfect for rental properties, heritage projects and retail stores. Plus because it is truly uncoupled, the tiled surface can be easily removed and replaced!!

Flexbone VAried

BAL Flexbone VAried is a high load-bearing, waterproof uncoupling membrane that accommodates lateral movement. A fast-track system, it can be used for a number of installations including heavy trafficked areas. Includes patented GripLock technology for greatest adhesive shear strength (50% better than other cavity mats) and unique bone structure enabling high flexibility and excellent deformability. High shear strength provides for higher levels of lateral movement. Special fleece provides for vapour pressure compensation.

A speedy solution for varied installations where a cavity mat solution is required. Incredible time savings of circa 30% when filling the mat with adhesive! The mat is waterproof, so is perfect for use in wet areas and no additional tanking is needed. Perfect for high load bearing commercial projects such as shopping malls, airports, car showrooms, office buildings and hospitals.

Flexbone 2Easy

BAL Flexbone 2Easy is a unique floating uncoupling mat where no adhesive is needed underneath – a truly uncoupled system! Because it is floating, only basic preparation is needed – simply sweep solid, level floors and lay the mat. No remove of residue, bitumen or laitance. No priming needed. Tile immediately to contaminated, stained or cracked screeds and over bitumen. Fast-track tiling on new anhydrite and sand:cement screeds that aren’t cured as moisture evaporates through covering joints.

Perfect for light commercial and domestic projects, BAL Flexbone 2Easy is a game-changing uncoupling system saving you time and money. Save a massive 2kg/m2 on adhesive compared to bonded mats, plus save on primer and preparation tools and products! Perfect for rental properties, heritage projects and retail stores. Plus because it is truly uncoupled, the tiled surface can be easily removed and replaced!!

 

Flexbone 2Easy

BAL Flexbone 2Easy is a unique floating uncoupling mat where no adhesive is needed underneath – a truly uncoupled system! Because it is floating, only basic preparation is needed – simply sweep solid, level floors and lay the mat. No remove of residue, bitumen or laitance. No priming needed. Tile immediately to contaminated, stained or cracked screeds and over bitumen. Fast-track tiling on new anhydrite and sand:cement screeds that aren’t cured as moisture evaporates through covering joints.

A game changing truly uncoupled mat system, BAL Flexbone 2Easy is perfect for rental properties, sensitive substrates in heritage project and retail projects as the mat does not need to be bonded – this means the tiled surface can be easily removed and replaced. A truly fast-track system as no preparation is needed on level and flat surfaces, plus save project costs on adhesive, primer and other preparation equipment.

Rapid-Mat

BAL Rapid-Mat is an innovative fast-track uncoupling system to accommodate lateral movement for tile installations on floors with limited movement. Reducing adhesive consumption relative to other systems and with minimal mat compression, BAL Rapid-Mat is lightweight and easy to install, with minimal height build-up with only 1mm thickness. BAL Rapid-Mat is suitable for internal flooring, renovation and new construction, domestic and commercial areas in medium/heavy duty applications. It is particularly recommended for heated floors and timber floors.

BAL Rapid-Mat provides the ultimate fail-safe for floor tiling projects. Laying down a new benchmark in uncoupling systems, BAL Rapid Mat helps to protect against lateral movement, while using 20% less adhesive when compared to using a cavity mat system. Easy to install, BAL Rapid-Mat is suitable for problematic floors and protects against cracks, fractures and other damage. BAL Rapid-Mat comes in 30 metre rolls and is available to purchase by the roll or metre.

Rapid-Mat

BAL Rapid-Mat is an innovative fast-track uncoupling system to accommodate lateral movement for tile installations on floors with limited movement. Reducing adhesive consumption relative to other systems and with minimal mat compression, BAL Rapid-Mat is lightweight and easy to install, with minimal height build-up with only 1mm thickness. BAL Rapid-Mat is suitable for internal flooring, renovation and new construction, domestic and commercial areas in medium/heavy duty applications. It is particularly recommended for heated floors and timber floors.

BAL Rapid-Mat provides the ultimate fail-safe for floor tiling projects, helping to protect against lateral movement, while using 20% less adhesive when compared to using a cavity mat system saving you and your tiler costs and time on your tiling project. Suitable for problematic floors, Rapid Mat protects against cracks, fractures and other damage and is ideal for use as a protective layer on top of underfloor heating, timber substrates and other challenging backgrounds.

 

Rapid-Mat

BAL Rapid-Mat is an innovative fast-track uncoupling system to accommodate lateral movement for tile installations on floors with limited movement. Reducing adhesive consumption relative to other systems and with minimal mat compression, BAL Rapid-Mat is lightweight and easy to install, with minimal height build-up with only 1mm thickness. BAL Rapid-Mat is suitable for internal flooring, renovation and new construction, domestic and commercial areas in medium/heavy duty applications. It is particularly recommended for heated floors and timber floors.

Providing the ultimate fail-safe for tilers, BAL Rapid Mat lays down a new benchmark in uncoupling systems. BAL Rapid Mat helps protect against lateral movement, uses 20% less adhesive when compared to using a cavity mat systems and is easy to install producing significant cost and time savings. Suitable for problematic floors, BAL Rapid Mat protects against cracks, fractures and other damage and is available to purchase by the roll or metre.

Rapid-Mat

Rapid-Mat is an innovative fast-track uncoupling system to accommodate lateral movement for tile installations on floors with limited movement. Reducing adhesive consumption relative to other systems and with minimal mat compression, Rapid-Mat is lightweight and easy to install, with minimal height build-up with only 1mm thickness. Rapid-Mat is suitable for internal flooring, renovation and new construction, domestic and commercial areas in medium/heavy duty applications. It is particularly recommended for heated floors and timber floors.

Anyone specifiying tiling onto problematic floors should consider BAL Rapid-Mat. Designed for floors which may be subject to lateral movement stresses, it is ideal for use with underfloor heating, timber substrates and other challenging backgrounds. It delivers major cost benefits over cavity-based uncoupling mats through needing less adhesive and being much faster to install. Projects can be completed more quickly because contractors spend less time mixing adhesive, with fewer interruptions to tiling, and have no need to wait for adhesive to dry.

Rapid-Mat

BAL Rapid-Mat is an innovative fast-track uncoupling system to accommodate lateral movement for tile installations on floors with limited movement. Reducing adhesive consumption relative to other systems and with minimal mat compression, BAL Rapid-Mat is lightweight and easy to install, with minimal height build-up with only 1mm thickness. BAL Rapid-Mat is suitable for internal flooring, renovation and new construction, domestic and commercial areas in medium/heavy duty applications. It is particularly recommended for heated floors and timber floors.

Reduce project costs with BAL Rapid-Mat, which lays down a new benchmark in uncoupling systems. This innovative product requires 20% less adhesive than cavity uncoupling systems. This saving amounts to 1.5kg less adhesive per square metre, a major saving of 45kg per 30m roll. BAL Rapid-Mat saves more time on-site by being simpler and faster to lay than other mats. Its super-slim lightweight profile makes it easy to roll out and mesaure, and it each piece can simply be butt-jointed to the next, without the need for additional tapes.

Single Part Fastflex

Featuring sound-reduction properties, BAL Single Part Fastflex is highly flexible and can also be utilised as isolating, anti-fracture underlay for ceramic tiles. Recommended for areas subject to limited movement and vibration, BAL Single Part Fastflex is water/frost resistant and is suitable for fixing ceramics, porcelain and vitrified tiles, mosaics, slate and certain natural stones including marble, terrazzo in dry or wet interior and exterior environments.

If you’re looking for an highly flexible, sound-deadening floor tile adhesive then this is the product for you. Available in 12.5kg packs, BAL Single Part Fastflex can be grouted after five hours. Please note this product is not suitable with BAL Rapid Mat, and when used on walls, battons will be required. Contact TAS when recommending approved sound-reduction systems.