BAL DPM

Multi-purpose two component, solvent free, low viscosity epoxy coating for use as a primer, one-coat DPM and waterproof coating prior to the application of ceramic tiles or natural stones on walls and floors, internally and externally. Ideal for raised access floors, wet rooms, ground floor slabs, and swimming pools. Use as a DPM on concrete up to 98% RH and anhydrite up to 87% RH. Can be used as a primer to aid adhesion to screeds, masonry, steel and other surfaces.

BAL DPM is a must have product for any stockist providing fixers and contractors with an all-in-one DPM, waterproofer and primer. BAL DPM should be recommened where a structural DPM is not present or has degraded over time and is ineffective. Resistant to grease, oil, aqueous salt solutions and hydrostatic pressure, new BAL DPM is perfect for internal or external projects such as subterranean rooms, balconies, marine, plant rooms, sewage plants and swimming/hydrotherapy pools.

Also available for a complete system: BAL Sand, BAL Self Adhesive Butyl Tape, BAL A2 Trowel, BAL B2 Trowel

Tank-it

BAL Tank-it is the ultimate waterproofing kit providing complete protection in any environment. It is suitable for use internally or externally to waterproof areas prior to tiling. Rapid-setting, BAL Tank-it can be tiled after only 90 minutes for fast-track project completion – what’s more no priming or matting is required. Available in a simple two-part mix (plus scrim tape), BAL Tank-it is easy to use and will fully seal walls and floors of total immersion areas such as pools, fountains, spas , balconies and terraces (an approved design required).

For complete waterproofing protection for internal or external project choose BAL Tank-it. Rapid drying and easy to use, Tank-it can be tiled in only 90 minutes ensure fast-track project completion. Suitable for almost any environment, BAL Tank-it fully seals walls and floors protecting against harmful water penetration. Available to purchase in a simple two-part mix (plus scrim tape), BAL Tank-it comes with FREE technical backup, product support and a 25 year guarantee for complete peace of mind.

Tank-it

BAL Tank-it combines ultimate performance, ultimate workability and ultimate versality for any tiling project – internal or external. Easy to use, and rapid-setting, BAL Tank-it is suitable for commercial and domestic projects including pools, balconies, and terraces.  As well as outstanding performance, Tank-it comes with a full back-up technical support and a 25 year guarantee for complete peace of mind for your customers.

BAL Tank-it is the ultimate waterproofing kit providing complete protection in any environment. It is suitable for use internally or externally to waterproof areas prior to tiling. Rapid-setting, BAL Tank-it can be tiled after only 90 minutes for fast-track project completion – what’s more no priming or matting is required. Available in a simple two-part mix (plus scrim tape), BAL Tank-it is easy to use and will fully seal walls and floors of total immersion areas such as pools, fountains, spas , balconies and terraces (an approved design required).

 

BAL DPM

Multi-purpose two component, solvent free, low viscosity epoxy coating for use as a primer, one-coat DPM and waterproof coating prior to the application of ceramic tiles or natural stones on walls and floors, internally and externally. Ideal for raised access floors, wet rooms, ground floor slabs, and swimming pools. Use as a DPM on concrete up to 98% RH and anhydrite up to 87% RH. Can be used as a primer to aid adhesion to screeds, masonry, steel and other surfaces.

Specify BAL DPM for new build projects or refurbishments where a strucual DPM is not present or has degraded over time and is ineffective. New BAL is perfect for internal or external projects such as subterranean rooms, balconies, marine, plant rooms, sewage plants and swimming/hydrotherapy pools. BAL DPM protects tiled projects against attack from soluble salts and other pollutants from residual construction moisture or moisture vapour from the earth. With a written 25-year guarantee, BAL gives you peace of mind that your project will last the test of time.

Also available for a full system: BAL Sand, BAL Self Adhesive Butyl Tape, BAL A2 Trowel, BAL B2 Trowel

BAL DPM

Multi-purpose two component, solvent free, low viscosity epoxy coating for use as a primer, one-coat DPM and waterproof coating prior to the application of ceramic tiles or natural stones on walls and floors, internally and externally. Ideal for raised access floors, wet rooms, ground floor slabs, and swimming pools. Use as a DPM on concrete up to 98% RH and anhydrite up to 87% RH. Can be used as a primer to aid adhesion to screeds, masonry, steel and other surfaces.

Resistant to grease, oil, aqueous salt solutions and hydrostatic pressure, new BAL DPM is an easy to use all-in-one product for various applications and environments that protects tiles from residual construction moisture and continual rising vapour from the earth. Perfect for new build projects or refurbishments where a structural DPM is not present or ineffective. What’s more it can be used a a two-coat waterproofer on walls and floors, and as a primer when sand-blinded on difficult substrates. BAL DPM comes with a written 25 year guarantee.

Also available for a complete system: BAL Sand, BAL Self Adhesive Butyl Tape, BAL A2 Trowel, BAL B2 Trowel

BAL DPM

Multi-purpose two component, solvent free, low viscosity epoxy coating for use as a primer, one-coat DPM and waterproof coating prior to the application of ceramic tiles or natural stones on walls and floors, internally and externally. Ideal for raised access floors, wet rooms, ground floor slabs, and swimming pools. Use as a DPM on concrete up to 98% RH and anhydrite up to 87% RH. Can be used as a primer to aid adhesion to screeds, masonry, steel and other surfaces.

Resistant to grease, oil, aqueous salt solutions and hydrostatic pressure, new BAL DPM is an easy to use all-in-one product for various applications and environments that protects tiles from residual construction moisture and continual rising vapour from the earth. Perfect for new build projects or refurbishments where a structural DPM is not present or ineffective. What’s more it can be used a a two-coat waterproofer on walls and floors, and as a primer when sand-blinded on difficult substrates. BAL DPM comes with BAL’s written 25 year guarantee.

Also available for a complete system: BAL Sand, BAL Self Adhesive Butyl Tape, BAL A2 Trowel, BAL B2 Trowel

Tank-it

BAL Tank-it is the ultimate waterproofing kit providing complete protection in any environment. It is suitable for use internally or externally to waterproof areas prior to tiling. Rapid-setting, BAL Tank-it can be tiled after only 90 minutes for fast-track project completion – what’s more no priming or matting is required. Available in a simple two-part mix (plus scrim tape), BAL Tank-it is easy to use and will fully seal walls and floors of total immersion areas such as pools, fountains, spas , balconies and terraces (approved design required).

For a total tanking  solution then look no further than BAL Tank-it. With EN Classification BS EN 14891, BAL Tank-it is suitable for a wide range of internal and external tiling projects – including total immersion. Easy to use it can be applied simply using a standard notched trowel, brush or roller. As well as outstanding performance, Tank-it comes with a full back-up technical support and a 25 year guarantee for complete peace of mind.

Waterproofing Kit

A waterproof protection system for walls and floors, BAL Waterproofing Kit provides complete protection of substrates (when used as part of a tanking system) prior to the installation of wall and floor tiles in dry or wet interior environments. Not suitable for exterior use or total immersion, it is recommended for showers, bathrooms, kitchens and laundry/utility room. Includes acrylic-based primer and coating, with polyester tape and matting.

If consumers are looking for a complete tanking solution for domestic showers and wetrooms, then look no further than BAL Waterproofing Kit. While not suitable for exterior use or for areas of total immersion, the BAL Waterproofing Kit can be used on most backgrounds and bases. Temperature resistant from -30C to 100C, the waterproof coating is pourable and easy to apply offering significant time savings.

WP1 Coating

BAL’s WP1 coating provides flexible and seamless waterproofing before tiling in showers, bathrooms, kitchens and laundry/utility rooms. WP1 sets in 24 hours and is suitable for use on most substrates in dry or wet interior areas, including areas where movement may occur such as drainage channels, upstands, pipes and floor wastes. If required it may be reinforced with polyester matting and tape.

BAL WP1 provides complete waterproof protection when used as part of a tanking system. BAL WP1 is suitable for areas where movement may occur and for preventing water penetration through suspended floors. Available in 8kg packages, or as part of our BAL Waterproof Kit, BAL WP1 is easy to use when applied with a brush or steel float.

Waterproof Plus

BAL Waterproof Plus provides a complete waterproofing kit for the protection of substrates (when used as part of a tanking system) prior to the installation of wall and floor tiles in dry or wet interior or exterior environments. The kit will fully seal walls and floors with an approved design for showers, wet rooms, swimming,hydrotherapy and spa pools, fountains, water features, terraces and balconies. Includes a two-part quick drying cementitious coating product, scrim tape and applicator tool.

BAL Waterproof Plus provides the complete waterproofing kit in one bucket. Providing complete waterproof protection for internal and external areas, Waterproof Plus is rapid-setting and can be tiled after two hours. Suitable for domestic and commercial projects, Waterproof Plus is easy to use and has no weight restriction from the use of the product, with the weight allowance dependent on the background or substrate.

Only available at Topps Tiles

Quickset Cement

A fast-setting, rapid-strength, low shrinkage cement for use in screeds and renders, BAL Quickset Cement accepts foot traffic in just three hours and is suitable for installations such as swimming pools or underfloor heating. It has a number of benefits including a 60 minute pot life, and 80% less shrinkage than a standard OPC screed. BAL Quickset Cement is water/frost resistant when set and can be pumped for fast track installation.

Distributors should consider recommending BAL Quickset Cement as a fast-track screed for indoor and outdoor installations. Crucially BAL Quickset Cement allows significant time savings to be made on key installations compared with using traditional OPC screeds, for example three weeks on swimming pools or 15 days for underfloor heating. As well as offering outstanding performance, BAL Quickset Cement comes with a 25 year guarantee.

Waterproof Plus

BAL Waterproof Plus provides a complete waterproofing kit for the protection of substrates (when used as part of a tanking system) prior to the installation of wall and floor tiles in dry or wet interior or exterior environments. The kit will fully seal walls and floors with an approved design for showers, wet rooms, swimming, hydrotherapy and spa pools, fountains, water features, terraces and balconies. Includes a two-part quick drying cementitious coating product, scrim tape and applicator tool.

The complete waterproofing kit in one bucket, BAL Waterproof Plus is a fixer’s dream. Providing complete waterproof protection for internal and external areas, BAL Waterproof Plus is rapid-setting and can be tiled after two hours (at 20°C), with a pot life of 45 minutes. Suitable for domestic and commercial projects, BAL Waterproof Plus is easy to use and has no weight restriction from the use of the product, with the weight allowance dependent on the background or substrate.

Product only available at Topps Tiles

Waterproofing Kit

A waterproof protection system for walls and floors, BAL Waterproofing Kit provides complete protection of substrates (when used as part of a tanking system) prior to the installation of wall and floor tiles in dry or wet interior environments. Not suitable for exterior use or total immersion, it is recommended for showers, bathrooms, kitchens and laundry/utility room. Includes acrylic-based primer and coating, with polyester tape and matting.

BAL Waterproofing Kit provides the complete solution when installing showers or wetrooms. While not suitable for exterior use or for areas of total immersion, the Waterproofing Kit can be used on most backgrounds and bases. Temperature resistant from -30C to 100C, the waterproof coating is pourable and easy to apply offering significant time savings.

Quickset Render

A pre-mixed rapid-setting polymer-modified cement:sand render mortar, BAL Quickset Render sets in only two hours at bed depth of 2 – 20mm. Suitable for preparing wall surfaces for installing ceramics or natural stone in dry or wet interior or exterior environments, it is also suitable as a patch repair mortar. This product can be used on backgrounds including concrete, brickwork, blockwork, lightweight concrete blocks, glazed tiles and plaster surfaces.

Drying in only two hours, BAL Quickset Render provides a fast-track solution for preparing walls prior to tiling, helping to reduce overall project costs and offering significant time savings for installations. Suitable for interior and exterior surfaces, BAL Quickset Render is multi-use and can also be utilised as a spot-repair mortar. Pre-mixed and coming in 25kg bags, BAL Quickset Render can be used in wet or dry conditions and has a pot life of 30 minutes.

Waterproofing Kit

A waterproof protection system for walls and floors, our BAL Waterproofing Kit provides complete protection of substrates (when used as part of a tanking system) prior to the installation of wall and floor tiles in dry or wet interior environments. Not suitable for exterior use or total immersion, it is recommended for showers, bathrooms, kitchens and laundry/utility room. Includes acrylic-based primer and coating, with polyester tape and matting.

If you’re looking for a complete tanking solution for domestic showers and wetrooms then look no further than our BAL Waterproofing Kit. Coming in handy 5kg kits for 2.7-3.5m2, additional sizes are also available in 8kg (coating) and 2.5 litre (Prime APD). Dry in 24 hours, the coating can be easily applied with either a brush or steel float.

WP1 Coating

BAL WP1 coating provides flexible and seamless waterproofing before tiling in showers, bathrooms, kitchens and laundry/utility rooms. BAL WP1 coating sets in 24 hours and is suitable for use on most substrates in dry or wet interior areas, including areas where movement may occur such as drainage channels, upstands, pipes and floor wastes. If required it may be reinforced with polyester matting and tape.

If you’re installing a shower or wet room then it is important to make the background waterproof by using a tanking system. When used as part of a suitable system, WP1 coating provides complete waterproof protection. Recommended in the home, WP1 is suitable for areas where movement may occur and for preventing water penetration through suspended floors.

WP1 Coating

BAL’s WP1 coating provides flexible and seamless waterproofing before tiling in showers, bathrooms, kitchens and laundry/utility rooms. BAL WP1 sets in 24 hours and is suitable for use on most substrates in dry or wet interior areas, including areas where movement may occur such as drainage channels, upstands, pipes and floor wastes. If required it may be reinforced with polyester matting and tape.

BAL WP1 provides complete waterproof protection when used as part of a tanking system. WP1 is suitable for areas where movement may occur and for preventing water penetration through suspended floors. Available in 8kg packages, or as part of our Waterproof Kit, BAL WP1 is pourable and easy to use when applied with a brush or steel float.

Quickset Cement

A fast-setting, rapid-strength, low shrinkage cement for use in screeds and renders, BAL Quickset Cement accepts foot traffic in just three hours and is suitable for installations such as swimming pools or underfloor heating. It has a number of benefits including a 60 minute pot life, and 80% less shrinkage than a standard OPC screed. BAL Quickset Cement is water/frost resistant when set and can be pumped for fast track installation.

BAL Quickset Cement provides outstanding performance as a fast-track screed for indoor or outdoor projects. Accepting foot traffic in only three hours, BAL Quickset Cement allows significant time savings to be made on key installations compared with traditional cement screeds, for example three weeks on swimming pools or 15 days for underfloor heating. As well as offering outstanding performance, BAL Quickset Cement comes with a 25 year guarantee.

Quickset Cement

A fast-setting, rapid-strength, low shrinkage cement for use in screeds and renders, BAL Quickset Cement accepts foot traffic in just three hours and is suitable for installations such as swimming pools or underfloor heating. It has a number of benefits including a 60 minute pot life, and 80% less shrinkage than a standard OPC screed. BAL Quickset Cement is water/frost resistant when set and can be pumped for fast track installation.

Fixers will appreciate BAL Quickset Cement for its versatility and on-site performance, providing a fast-track screed that accepts foot traffic sooner than other products. Crucially on key installations significant time savings are made compared to using traditional OPC screeds, for example three weeks on swimming pool installations or 15 days for under floor heating. It’s improved flexural and compressive strength allowing for learner mix ratios helping to reduce your costs.

 

Quickset Render

A pre-mixed rapid-setting polymer-modified cement:sand render mortar, BAL Quickset Render sets in only two hours at bed depth of 2 – 20mm. Suitable for preparing wall surfaces for installing ceramics or natural stone in dry or wet interior or exterior environments, it is also suitable as a patch repair motar. This product can be used on backgrounds including concrete, brickwork, blockwork, lightweight concrete blocks, glazed tiles and plaster surfaces.

If you or your tradesman is looking for a rapid-setting render to prepare walls prior to tiling then look no further than BAL Quickset Render. Unlike other renders, Quickset Render is ready-mixed and sets in only two hours, ensuring that jobs can be finished in hours rather than days, saving you time and money. With a pot-life of 30 minutes, Quickset Cement can also be used as a spot-repair mortar for external and internal damage.

Quickset Render

A pre-mixed rapid-setting polymer-modified cement:sand render mortar, BAL Quickset Render sets in only two hours at bed depth of 2 – 20mm. Suitable for preparing wall surfaces for installing ceramics or natural stone in dry or wet interior or exterior environments, it is also suitable as a patch repair mortar. This product can be used on backgrounds including concrete, brickwork, blockwork, lightweight concrete blocks, glazed tiles and plaster surfaces.

Get the job done faster and easier by using BAL Quickset Render to help prepare wall surfaces prior to tiling. Unlike other renders, BAL Quickset Render is ready-mixed and sets in only two hours, giving you the ability to finish jobs in hours rather than days, saving you time and money. With a pot-life of 30 minutes, BAL Quickset Render can also be used as a spot-repair mortar for external and internal damage.

Tank-it

BAL Tank-it is the ultimate waterproofing kit providing complete protection in any environment. It is suitable for use internally or externally to waterproof areas prior to tiling. Rapid-setting, BAL Tank-it can be tiled after only 90 minutes for fast-track project completion – what’s more no priming or matting is required. Available in a simple two-part mix (plus scrim tape), BAL Tank-it is easy to use and will fully seal walls and floors of total immersion areas such as pools, fountains, spas , balconies and terraces (an approved design required).

BAL Tank-it provides complete waterproofing protection for any commercial project – whether internal or external. Conforming to EN classification BS EN 14891, BAL Tank-it is suitable for large scale projects such as swimming pools, balconies, terraces, communal wet rooms and showers. As well as outstanding waterproofing protection, specifiers will receive full technical support, on-site consultancy and 25 year product guarantee.

Tank-it

BAL Tank-it is the ultimate waterproofing kit providing complete protection in any environment. It is suitable for use internally or externally to waterproof areas prior to tiling. Rapid-setting, BAL Tank-it can be tiled after only 90 minutes for fast-track project completion – what’s more no priming or matting is required. Available in a simple two-part mix (plus scrim tape), BAL Tank-it is easy to use and will fully seal walls and floors of total immersion areas such as pools, fountains, spas , balconies and terraces (an approved design required).

For a total tanking solution for commercial or domestic projects, inside or out, then look no further than BAL Tank-it for ultimate waterproofing protection in any environment. With EN Classification BS EN 14891, BAL Tank-it is suitable for a wide range of internal and external tiling projects – including total immersion. Each component is sold separately allowing for larger mixes for installations such as communal showers, large wet rroms or swimming pools. As well as outstanding performance, Tank-it comes with a full back-up technical support and a 25 year guarantee for complete peace of mind.

 

Waterproof Plus

BAL Waterproof Plus provides a complete waterproofing kit for the protection of substrates (when used as part of a tanking system) prior to the installation of wall and floor tiles in dry or wet interior or exterior environments. The kit will fully seal walls and floors with an approved design for showers, wet rooms, swimming,hydrotherapy and spa pools, fountains, water features, terraces and balconies. Includes a two-part quick drying cementitious coating product, scrim tape and applicator tool.

Contractors can be assured that with BAL Waterproof Plus they will get the complete tanking package providing ultimate protection for internal, external, commercial or domestic projects. Delivering complete protection of substrates, BAL Waterproof Plus sets in only two hours, allowing projects to be completed in double-quick time delivering real project savings. Simple and easy to use, BAL Waterproof Plus exceeds British Standards and can be used on complex installations with free technical guidances from the BAL Technical Advisory Service.

Product only available at Topps Tiles

Waterproof Plus

BAL Waterproof Plus provides a complete waterproofing kit for the protection of substrates (when used as part of a tanking system) prior to the installation of wall and floor tiles in dry or wet interior or exterior environments. The kit will fully seal walls and floors with an approved design for showers, wet rooms, swimming,hydrotherapy and spa pools, fountains, water features, terraces and balconies. Includes a two-part quick drying cementitious coating product, scrim tape and applicator tool.

The complete waterproofing kit in one bucket, BAL Waterproof Plus is a fixer’s dream. Providing complete waterproof protection for internal and external areas, BAL Waterproof Plus is rapid-setting and can be tiled after less than two hours (at 20oC), with a pot life of 45 minutes. Suitable for domestic and commercial projects, BAL Waterproof Plus is easy to use and has no weight resistriction from the use of the product, with the weight allowance dependent on the background or substrate.

Only available at Topps Tiles

Waterproofing Kit

A waterproof protection system for walls and floors, our Waterproofing Kit provides complete protection of substrates (when used as part of a tanking system) prior to the installation of wall and floor tiles in dry or wet interior environments. Not suitable for exterior use or total immersion, it is recommended for showers, bathrooms, kitchens and laundry/utility room. Includes acrylic-based primer and coating, with polyester tape and matting.

Consider specifying BAL Waterproofing Kit as a complete tanking solution for domestic showers and wetrooms. BAL Waterproofing Kit is recommended for domestic and commercial installations, and while not suitable for areas of total immersion, it can be used on most backgrounds and bases. Temperature resistant from -30C to 100C, the waterproof coating is pourable and easy to apply offering significant time savings for projects.

Waterproofing Kit

A waterproof protection system for walls and floors, BAL Waterproofing Kit provides complete protection of substrates (when used as part of a tanking system) prior to the installation of wall and floor tiles in dry or wet interior environments. Not suitable for exterior use or total immersion, it is recommended for showers, bathrooms, kitchens and laundry/utility room. Includes acrylic-based primer and coating, with polyester tape and matting.

For use as part of tanking system for complete waterproof protection, the BAL Waterproofing Kit is recommended for domestic and commercial installations. While not suitable for exterior use or for areas of total immersion, the BAL Waterproofing Kit can be used on most backgrounds and bases. Temperature resistant from -30C to 100C, the waterproof coating is pourable and easy to apply offering significant time savings.

WP1 Coating

BAL’s WP1 coating provides flexible and seamless waterproofing before tiling in showers, bathrooms, kitchens and laundry/utility rooms. WP1 sets in 24 hours and is suitable for use on most substrates in dry or wet interior areas, including areas where movement may occur such as drainage channels, upstands, pipes and floor wastes. If required it may be reinforced with polyester matting and tape.

Specify WP1 for use as part of a tanking system for showers and wet rooms. Setting in 24 hours, WP1 helps prevent water penetration through suspended floors and is suitable for most backgrounds. While not suitable for areas of total immersion, WP1 is recommended for waterproofing domestic areas prior to fixing wall and floor tiles.

WP1 Coating

BAL’s WP1 coating provides flexible and seamless waterproofing before tiling in showers, bathrooms, kitchens and laundry/utility rooms. BAL WP1 Coating sets in 24 hours and is suitable for use on most substrates in dry or wet interior areas, including areas where movement may occur such as drainage channels, upstands, pipes and floor wastes. If required it may be reinforced with polyester matting and tape.

For use as part of tanking system for complete waterproof protection, BAL WP1 Coating is acrylic-based and is recommended for domestic and commercial installations. While not suitable for exterior use or for areas of total immersion, BAL WP1 can be applied on most backgrounds and bases. Temperature resistant from -30C to 100C, BAL WP1 is pourable and easy to apply offering significant time savings.

Quickset Cement

A fast-setting, rapid-strength, low shrinkage cement for use in screeds and renders, Quickset Cement accepts foot traffic in just three hours and is suitable for installations such as swimming pools or underfloor heating. It has a number of benefits including a 60 minute pot life, and 80% less shrinkage than a standard OPC screed. Quickset Cement is water/frost resistant when set and can be pumped for fast track installation.

BAL Quickset Cement provides outstanding on-site performance, accepting foot traffic in just three hours, allowing other trades on-site sooner. Crucially on key installations significant time savings are made compared to using traditional OPC screeds, for example three weeks on swimming pool installations or 15 days for under floor heating. Developed for easy use on commercial site, it’s improved flexural strength allows for leaner mix ratios in certain installations helping to reduce project costs.

 

Quickset Cement

A fast-setting, rapid-strength, low shrinkage cement for use in screeds and renders, Quickset Cement accepts foot traffic in just three hours and is suitable for installations such as swimming pools or underfloor heating. It has a number of benefits including a 60 minute pot life, and 80% less shrinkage than a standard OPC screed. Quickset Cement is water/frost resistant when set and can be pumped for fast track installation.

Offering versality and outstanding on-site performance, specify BAL Quickset Cement as a fast-track screed for your project. Accepting foot traffic in just three hours, BAL Quickset Cement allows significant time savings to be made on key installations compared with using traditional OPC screeds, for example three weeks on swimming pools or 15 days for underfloor heating. As well as offersing outstanding performance, Quickset Cement comes with a 25 year guarantee.

Quickset Render

A pre-mixed rapid-setting polymer-modified cement:sand render mortar, Quickset Render sets in only two hours at bed depth of 2 – 20mm. Suitable for preparing wall surfaces for installing ceramics or natural stone in dry or wet interior or exterior environments, it is also suitable as a patch repair motar. This product can be used on backgrounds including concrete, brickwork, blockwork, lightweight concrete blocks, glazed tiles and plaster surfaces.

Drying in only two hours, Quickset Render provides a fast-track solution for preparing walls prior to tiling, helping to reduce overall project costs and offering significant time savings for installations. Suitable for interior and exterior surfaces, Quickset Render is multi-use and can also be utilised as a spot-repair mortar. Pre-mixed and coming in 25kg bags, Quickset Render can be used in wet or dry conditions and has a pot life of 30 minutes.

Quickset Render

A pre-mixed rapid-setting polymer-modified cement:sand render mortar, BAL Quickset Render sets in only two hours at bed depth of 2 – 20mm. Suitable for preparing wall surfaces for installing ceramics or natural stone in dry or wet interior or exterior environments, it is also suitable as a patch repair motar. This product can be used on backgrounds including concrete, brickwork, blockwork, lightweight concrete blocks, glazed tiles and plaster surfaces.

Drying in only two hours, BAL Quickset Render provides a fast-track solution for preparing walls prior to tiling, helping to reduce overall project costs and offering significant time savings for installations. Suitable for interior and exterior surfaces, BAL Quickset Render is multi-use and can also be utilised as a spot-repair mortar. Pre-mixed and coming in 25kg bags, BAL Quickset Render can be used in wet or dry conditions and has a pot life of 30 minutes.