BAL Terrace Grout

BAL Terrace Grout is a high performance, polymer-modified cementitious grout for grouting joints between natural stone and porcelain tiles in external areas. With exceptional bond strength and flexibility, BAL Terrace Grout can used for joint widths up to 15mm. Available in four popular colours – Black, Light Grey, Dark Grey and Beige. Hard wearing, water and frost-resistant.

Mixing quickly on-site with water, BAL Terrace Grout provides a smooth finish on external tiled or paved patios, terraces and paths. Easy to spread, with a pot life of 45 minutes, BAL Terrace Grout is the fixers choice for jointing external pavers, tiles and natural stone. Available in 10kg bags, coverage is approximately 0.5kg/m2 at 5mm joint widths. 24 hours cure time.

 

BAL Terrace Grout

BAL Terrace Grout is a high performance, polymer-modified cementitious grout for grouting joints between natural stone and porcelain tiles in external areas. With exceptional bond strength and flexibility, BAL Terrace Grout can used for joint widths up to 15mm. Available in four popular colours – Black, Light Grey, Dark Grey and Beige. Hard wearing, water and frost-resistant.

An easy mixing external grout, BAL Terrace Grout provides contractors with a smooth, abrasion resistant jointing compound for external areas. 45 minute pot life ensures longer time to mix and grout tiled or paved patios, terraces and paths. Available in 10kg bags, coverage is approximately 0.5kg/m2 at 5mm joint widths. 24 hours cure time.

BAL Terrace Grout

BAL Terrace Grout is a high performance, polymer-modified cementitious grout for grouting joints between natural stone and porcelain tiles in external areas. With exceptional bond strength and flexibility, BAL Terrace Grout can used for joint widths up to 15mm. Available in four popular colours – Black, Light Grey, Dark Grey and Beige. Hard wearing, water and frost-resistant.

An easy mixing external grout, BAL Terrace Grout provides contractors with a smooth, abrasion resistant jointing compound for external areas. 45 minute pot life ensures longer time to mix and grout tiled or paved patios, terraces and paths. Available in 10kg bags, coverage is approximately 0.5kg/m2 at 5mm joint widths. 24 hours cure time.

BAL Grout Flex Wide Joint

BAL Grout Flex Wide Joint is a water and frost resistant cementitious wide joint tile grout for walls and floors and is suitable for joint widths from 3mm to 20mm. Suitable for grouting ceramics, mosaics and natural stone/quarry tiles, in dry or wet interior and exterior environments, Wide Joint comes in five key colours: White, Jasmine Cream, Light Grey, Mid Grey, and Dark Grey. While recommended for swimming pools, BAL Grout Flex Wide Joint is not suitable for power showers with body jets, food preparation/storage areas and areas requiring waterproof grouting.

Consider specifying BAL Grout Flex Wide Joint tile grout on your M40 or M20 specifications for domestic or commercial floor tiling project where a grout is required for joint widths up to 20mm. Perfect for swimming pools, areas of movement and heavily trafficked floors.

Download flyer and colour references

BAL Grout Flex Wide Joint

BAL Grout Flex Wide Joint is a water and frost resistant cementitious wide joint tile grout for walls and floors and is suitable for joint widths from 3mm to 20mm. Suitable for grouting ceramics, mosaics and natural stone/quarry tiles, in dry or wet interior and exterior environments, Wide Joint comes in five key colours: White, Jasmine Cream, Light Grey, Mid Grey, and Dark Grey. While recommended for swimming pools, BAL Grout Flex Wide Joint is not suitable for power showers with body jets, food preparation/storage areas and areas requiring waterproof grouting.

When grouting floor and wall tile projects with wide joints consider BAL Grout Flex Wide Joint. Perfect for swimming pools, areas of limited movement and heavily trafficked floors, Grout Flex Wide Joint is suitable for both commercial and domestic projects. With a pot life of 2 hours minutes and curing in 24 hours, Wide Joint comes in 10kg and 5kg packs. Smooth and easy to spread over larger floor areas.

Download flyer and colour references

BAL Grout Flex

Highly flexible and water/frost-resistant, BAL Grout Flex is suitable for grouting wall tiles with joints up to 5mm. Recommended for swimming pools, power showers and areas of limited movement, BAL Grout Flex has a built-in admixture for increased flexibility and high bond strength at the edges of tiles or mosaics. Please note this product is not suitable for food preparation/storage areas and areas requiring waterproof grouting. Coming in five key colourways – White, Jasmine Cream, Light Grey, Mid Grey and Dark Grey for a knock-out finish.

Specify BAL Grout Flex on your M40 or M20 specs for large commercial projects where a flexible grout is required for walls with heavy-use, movement and vibration such as swimming pools and power showers. Cement-based with a built in admixture, BAL Grout Flex suitable for porcelain, glazed and fully vitrified tiles, glass and ceramic mosaics, marble and natural stone with joint widths up to 5mm. Suitable for interior and exterior applications.

Download flyer and colour references

BAL Grout Flex

Highly flexible and water/frost-resistant, BAL Grout Flex is suitable for grouting wall tiles with joints up to 5mm. Recommended for swimming pools, power showers and areas of limited movement, BAL Grout Flex has a built-in admixture for increased flexibility and high bond strength at the edges of tiles or mosaics. Please note this product is not suitable for food preparation/storage areas and areas requiring waterproof grouting. Coming in five key colourways – White, Jasmine Cream, Light Grey, Mid Grey and Dark Grey for a knock-out finish.

Fixers are sure to welcome the many benefits of BAL Grout Flex which is perfect for grouting porcelain, glazed and fully vitrified tiles, glass and ceramic mosaics, marble and natural stone with joints up to 5mm. As a highly flexible grout, BAL Grout Flex is perfect for domestic and commercial environments where heavy use is expected. Available in 5kg and 10kg packs, BAL Grout Flex has a pot life of 2 hours for extended working and cures in 24 hours.

Download flyer and colour references

BAL Terrace Grout

BAL Terrace Grout is a high performance, polymer-modified cementitious grout for grouting joints between natural stone and porcelain tiles in external areas. With exceptional bond strength and flexibility, BAL Terrace Grout can used for joint widths up to 15mm. Available in four popular colours – Black, Light Grey, Dark Grey and Beige. Hard wearing, water and frost-resistant.

The final component of BAL’s External Tiling Range, BAL Terrace Grout mixes quickly on site and provides a smooth and abrasion-resistant finish on external tiled or paved patios, terraces and paths. Available in 10kg bags, coverage is approximately 0.5kg/m2 at 5mm joint widths. 24 hours cure time.

ORDER TODAY

BAL Grout Flex Wide Joint

BAL Grout Flex Wide Joint is a water and frost resistant cementitious wide joint tile grout for walls and floors and is suitable for joint widths from 3mm to 20mm. Suitable for grouting ceramics, mosaics and natural stone/quarry tiles, in dry or wet interior and exterior environments, Wide Joint comes in five key colours: White, Jasmine Cream, Light Grey, Mid Grey, and Dark Grey. While recommended for swimming pools, BAL Grout Flex Wide Joint is not suitable for power showers with body jets, food preparation/storage areas and areas requiring waterproof grouting.

Contractors should consider BAL Grout Flex Wide Joint tile grout for both commercial and domestic wall and floor tiling projects where joints are from 3mm to 20mm wide. Perfect for swimming pools, areas of movement and heavily trafficked floors, Grout Flex Wide Joint has a pot life of 2 hours allowing sufficient working time, cures in 24 hours and comes in pack sized of 10kg and 5kg.

Download flyer and colour references

BAL Grout Flex

Highly flexible and water/frost-resistant, BAL Grout Flex is suitable for grouting wall tiles with joints up to 5mm. Recommended for swimming pools, power showers and areas of limited movement, BAL Grout Flex has a built-in admixture for increased flexibility and high bond strength at the edges of tiles or mosaics. Please note this product is not suitable for food preparation/storage areas and areas requiring waterproof grouting. Coming in five key colourways – White, Jasmine Cream, Light Grey, Mid Grey and Dark Grey for a knock-out finish.

BAL Grout Flex offers contractors numerous benefits for commercial and domestic projects. Suitable for grouting porcelain, glazed and fully-vitrified tiles, glass and ceramic mosaics, marble and natural stone tiles with joint widths up to 5mm, BAL Grout Flex is highly flexible enabling it to withstand heavy use, vibration and movement. With a super smooth finish, BAL Grout Flex comes in pack sized of 5kg and 10kg. It has an extended pot life of 2 hours and fully cures in 24 hours.

Download flyer and colour references

Micromax2

Rapid-setting and highly flexible wall and floor grout, BAL Micromax2 is formulated with built-in Microban antimicrobial protection for walls and floors. Suitable for joint widths from 1mm to 20mm, BAL Micromax2 sets in two to three hours, enabling faster completion. An efflorescence-free formulation minimises risk of patchy discolouration. A built in admixture ensures a clean and even finish for grout joints. It is available in a range of 20 colours including NEW Tornado Sky, Dovetail, Taupe Grey, Storm Grey, Walnut, Hazel, Mahogany, Cornflower White, Peppermint, Pink Champagne and Primrose.  Snow, Manilla, Gunmetal, Pebble, Jasmine, Ebony, Smoke, Anthracite and White remain in the collection. For large projects, additional colours are available upon request. What’s more, the range comes with with colour-matched Micromax Sealants.

Designed with the fixer in mind, BAL Micromax2 ticks all the boxes for a flexible tile grout providing all-round protection against mould. BAL Micromax2 is recommended for domestic and commercial installations due to its enhanced durability , making it suitable for power showers, wet rooms, heated floors and timber screeds. Recommended applications areas include leisure centres, bathrooms, changing rooms, restaurants/food consumption areas, domestic kitchens and shopping malls.

ALSO AVAILABLE: “Inspiration” collection (available at Topps Tiles) – Antique White, Lime, Praline, Pecan, Coffee, Cedar, Brooklyn, Cement, Graphite, Ash, Jade, Sky, Bush, Natural Light, Stonewash Blue, Powdered Rose. Regal Collection (available at Topps Tiles only): Regal Grey, Regal Smoke, Regal Vanilla, Regal Ash

BAL Grout Flex

Highly flexible and water/frost-resistant, BAL Grout Flex is suitable for grouting wall tiles with joints up to 5mm. Recommended for swimming pools, power showers and areas of limited movement, BAL Grout Flex has a built-in admixture for increased flexibility and high bond strength at the edges of tiles or mosaics. Please note this product is not suitable for food preparation/storage areas and areas requiring waterproof grouting. Coming in five key colourways – White, Jasmine Cream, Light Grey, Mid Grey and Dark Grey for a knock-out finish.

BAL Grout Flex offers numerous benefits to the end-user and is suitable for commercial and domestic projects. Suitable for grouting porcelain, glazed and fully-vitrified tiles, glass and ceramic mosiacs, marble and natural stone tiles with joint widths up to 5mm. BAL Grout Flex is highly flexible enabling it to withstand heavy use, vibration and movement. BAL Grout Flex comes in pack sizes of 5kg and 10kg.

Download flyer and colour references

Micromax2

Rapid-setting and highly flexible tile grout, BAL Micromax2 is formulated with built-in Microban antimicrobial protection for walls and floors. Suitable for joint widths from 1mm to 20mm, BAL Micromax2 sets in two to three hours, enabling faster completion. An efflorescence-free formulation minimises risk of patchy discolouration. A built in admixture ensures a clean and even finish for grout joints. It is available in a range of 20 colours including NEW Tornado Sky, Dovetail, Taupe Grey, Storm Grey, Walnut, Hazel, Mahogany, Cornflower White, Peppermint, Pink Champagne and Primrose.  Snow, Manilla, Gunmetal, Pebble, Jasmine, Ebony, Smoke, Anthracite and White remain in the collection. For large projects, additional colours are available upon request. What’s more, the range comes with with colour-matched Micromax Sealants.

Micromax2 provides a number of benefits for the specifier and is suitable for commercial and domestic installation areas including leisure centres, bathrooms, changing rooms, restaurants, domestic kitchens and shopping malls. Micromax2 is recommended for power showers, wet rooms, heated floors and timber floors due to its enhanced durability and flexibility and can be used for grouting porcelain, glazed and fully vitrified tiles, glass and ceramic mosiacs, marble and natural stone in interior or exterior environments.

ALSO AVAILABLE: Micromax2 “Inpirations” range (available only at Topps Tiles) Antique White, Lime, Praline, Pecan, Coffee, Cedar, Brooklyn, Cement, Graphite, Ash, Jade, Sky, Bush, Natural Light, Stonewash Blue, Powdered Rose. Regal Collection (available at Topps Tiles only): Regal Grey, Regal Smoke, Regal Vanilla, Regal Ash

Easypoxy AG

Chemical-resistant and solvent free, BAL Easypoxy AG is a high strength epoxy adhesive and grout suitable for walls and floors. Durable and abrasion-resistant, it provides an excellent set in 24hours with full cure at seven days. Its use is recommended for food preparation areas where a hygienic, easily cleaned surface is required. BAL Easypoxy AG is recommended for; domestic kitchens and worktops, breweries, abattoirs, dairies, swimming and hydro therapy pools, bathrooms, showers and power showers, hospital and industrial/chemical plants.

Easypoxy AG provides a two-in-one adhesive and grout solution that is perfect for hygiene critical environments where additional chemical resistance is required. Easypoxy AG is waterproof and crucially does not permit the entry of bacteria or dirt. As a two-in-one product, Easypoxy AG produces significant time and cost savings for your project. White in colour, the product is perfect for ceramics, porcelain and fully vitrified tiles, mosaics and glass or translucent tiles including glass mosaics.

Micromax2

Rapid-setting and highly flexible tile grout, BAL Micromax2 is formulated with built-in Microban antimicrobial protection for walls and floors. Suitable for joint widths from 1mm to 20mm, BAL Micromax2 sets in two to three hours, enabling faster completion. An efflorescence-free formulation minimises risk of patchy discolouration. A built in admixture ensures a clean and even finish for grout joints. It is available in a range of 20 colours including NEW Tornado Sky, Dovetail, Taupe Grey, Storm Grey, Walnut, Hazel, Mahogany, Cornflower White, Peppermint, Pink Champagne and Primrose.  Snow, Manilla, Gunmetal, Pebble, Jasmine, Ebony, Smoke, Anthracite and White remain in the collection. For large projects, additional colours are available upon request. What’s more, the range comes with with colour-matched Micromax Sealants.

Designed with the homeowner in mind, Micromax2 ticks all the boxes for a flexible grout providing all-round protection against mildew and black mould. Setting in only 2-3 hours, Micromax2 is recommended for domestic and commercial installations due to its enhanced durability , making it suitable for power showers, wet rooms, heated floors and timber screeds. Micromax2 can be used for grouting porcelain, glazed and fully vitrified tiles, glass and ceramic mosiacs, marble and natural stone in interior or exterior environments.

ALSO AVAILABLE: “Inspiration” collection (available at Topps Tiles) – Antique White, Lime, Praline, Pecan, Coffee, Cedar, Brooklyn, Cement, Graphite, Ash, Jade, Sky, Bush, Natural Light, Stonewash Blue, Powdered Rose. Regal Collection (available at Topps Tiles only): Regal Grey, Regal Smoke, Regal Vanilla, Regal Ash

Microflex

BAL Microflex is a highly flexible grout suitable for joints up to 5mm. Formulated with built-in Microban antimicrobial protection for walls, BAL Microflex is water and frost-resistant and offers high bond strength. Recommended for swimming pools and power showers, BAL Microflex can also be used on some floors depending on tile type, area and traffic. Not suitable for food preparation, storage areas, spas, Jacuzzis, chemical plants, power showers with body jets and areas requiring waterproof grouting.

A highly flexible grout, Microflex offers homeowner and fixer improved characteristics for grouting porcelain, glazed and fully vitrified tiles, glass and ceramic mosiacs, marble and natural stone in dry and wet environments. Available in white and ivory, Microflex comes in handy pack sizes of 10kg and 3.5kg. Its highly flexible nature makes it perfect for areas of limited movement/vibration and total immersion. Microflex is suitable for use with porcelain, glazed and fully vitrified tiles, glass and ceramic mosiacs, marble and natural stone in dry and wet environments.

Easypoxy AG

New and improved BAL Easypoxy AG is a high strength, chemical-resistant and solvent free epoxy adhesive and grout for walls and floors in hygiene critical locations such as kitchens, industrial/chemical plants, showers, swimming pools and hospitals. The new formulation provides users with an epoxy that is easier to mix, apply and clean-off during installations. Now available in white, black and grey, BAL Easypoxy AG has an excellent set time of only 12 hours, compared with 24 hours previously. The new formulation also has an extended pot life of 45 minutes for easier mixing.

BAL Easypoxy AG provides a two-in-one adhesive and grout solution that is perfect for hygiene critical environments where additional chemical resistance is required. BAL Easypoxy AG is waterproof and crucially does not permit the entry of bacteria or dirt. As a two-in-one product, BAL Easypoxy AG produces significant time and cost savings for the end-user. Available in 4kg tubsthe product is perfect for ceramics, porcelain and fully vitrified tiles, mosaics and glass or translucent tiles including glass mosaics.

BAL Grout

A classic tile grout, BAL Grout is water and frost resistant and can be used for joint widths up to 3mm. Suitable for grouting ceramics and mosiacs in dry or wet interior and exterior environments, BAL Grout is receommended for swimming pools. Further applications are possible by adding BAL Admix GT1 to provide flexibility, increased adhesion and high bond strength. Available in white, ivory and grey.

BAL Grout is perfect for domestic tiling projects where cost savings are essential. Curing in 24 hours, it is suitable for use with ceramics and mosiacs, and provides excellent coverage.While not suitable for food preparation areas, power showers and areas requiring waterproof grouting, BAL Grout is suitable for large scale projects including swimming pools, areas of movement/vibration and heavily trafficked floors when used with BAL Admix GT1.

Micromax2

Rapid-setting and highly flexible, BAL Micromax2 is formulated with built-in Microban antimicrobial protection for walls and floors. Suitable for joint widths from 1mm to 20mm, Micromax2 sets in two to three hours, enabling faster completion. An efflorescence-free formulation minimises the risk of patchy discolouration. A built in admixture ensures a clean and even finish for grout joints. Now available in new SNOW, other colours include White, Manilla, Gunmetal, Pebble, Jasmine, Ebony, Smoke and Anthracite. For large projects, additional colours are available upon request.

Designed with the end-user in mind, BAL Micromax2 ticks all the boxes for a flexible grout providing all-round protection against mildew and black mould. Setting in only 2-3 hours, BAL Micromax2 is recommended for domestic and commercial installations due to its enhanced durability, making it suitable for power showers, wet rooms, heated floors and timber screeds. Recommended applications areas include leisure centers, bathrooms, changing rooms, restaurants/food consumption areas, domestic kitchens and shopping malls.

Floor Epoxy

BAL Floor Epoxy is a three-part hygenic impervious epoxy resin tile grout for floors. For joint widths up to 20mm, BAL Floor Epoxy is recommended for large installations including food preparation/processing plants, swimming pools/sports and leisure centres, shopping malls/supermarkets, hospitals and industrial/chemical plants. It is also suitable as a tile adhesive for chemical plants with metallic backgrounds, and for areas requiring chemical resistance.

Hard-wearing and offering high resistance to abrasion and impact, Floor Epoxy also provides high protection against bacteria and chemical attack. Suitable for most tile types and curing in 24 hours, Floor Epoxy is recommended for large-scale projects where chemical protection is required. A pot life of 60 minutes produces cost and time savings for fixer and homeowners, as fewer mixes are needed per project.

BAL Grout

A classic tile grout, BAL Grout is water and frost resistant and can be used for joint widths up to 3mm. Suitable for grouting ceramics and mosiacs in dry or wet interior and exterior environments, BAL Grout is recommended for swimming pools. Further applications are possible by adding BAL Admix GT1 to provide flexibility, increased adhesion and high bond strength. Available in white only.

A firm favourite for many years, BAL Grout exceeds the standard for a CG1 grout and can be recommended for commercial and domestic installations. BAL Grout has a pot life of 60 minutes and cures in 24 hours. Temperature resistant from -30C to 150C, BAL Grout is available in 20kg, 10kg, 3.5kg and 1.5kg. Typical coverage of 6.4m2 per kg can be achieved for 200x200x6mm tiles with joint widths of 2mm.

Wide Joint

BAL Wide Joint is a water and frost resistant cementitious tile grout for walls and floors and is suitable for joint widths from 2mm to 12mm. Suitable for grouting ceramics, mosiacs and natural stone/quarry tiles, in dry or wet interior and exterior environments, BAL Wide Joint comes in four colours: ivory, grey, limestone, and sandstone. While recommended for swimming pools, Wide Joint is not suitable for power showers, food preparation/storage areas and areas requiring waterproof grouting.

When grouting floor and wall tile projects with wide joints consider BAL Wide Joint. Perfect for swimming pools, areas of movement and heavily trafficked floors, BAL Wide Joint is suitable for both commercial and domestic projects. With a pot life of 60 minutes and curing in 24 hours, BAL Wide Joint comes in 10kg and 3.5kg packs depending on colour. Further applications are possible by adding BAL Admix GT1 to provide flexibility, increased adhesion and reduced water permeability.

Floor Epoxy

BAL Floor Epoxy is a three-part hygenic impervious epoxy resin tile grout for floors. For joint widths up to 20mm, BAL Floor Epoxy is recommended for large installations including food preparation/processing plants, swimming pools/sports and leisure centres, shopping malls/supermarkets, hospitals and industrial/chemical plants. It is also suitable  for chemical plants with metallic backgrounds, and for areas requiring chemical resistance.

With a resin-based formulation comprising liquid resin, liquid hardener and powder filler, BAL Floor Epoxy is suitable for most tile types and cures and has a pot life of 60 minutes, curing in 24 hours. In addition, BAL Floor Epoxy is hard-wearing and offers high resistance to abrasion and impact, as well providing protection against bacteria and chemical attack. Available in grey, BAL Floor Epoxy comes in 10kg packs.

Easypoxy AG

New and improved BAL Easypoxy AG is a high strength, chemical-resistant and solvent free epoxy adhesive and grout for walls and floors in hygiene critical locations such as kitchens, industrial/chemical plants, showers, swimming pools and hospitals. The new formulation provides users with an epoxy that is easier to mix, apply and clean-off during installations. Now available in 4kg tubs and in white, black and grey, BAL Easypoxy AG has an excellent set time of only 12 hours, compared with 24 hours previously. The new formulation also has an extended pot life of 45 minutes for easier mixing.

BAL Easypoxy AG provides tilers with a two-in-one adhesive and grout solution that is perfect for hygiene critical environments where additional chemical resistance is required. BAL Easypoxy AG is waterproof and crucially does not permit the entry of bacteria or dirt. As a two-in-one product, BAL Easypoxy AG produces significant time and cost savings for the fixer.  BAL Easypoxy AG is suitable for ceramics, porcelain and fully vitrified tiles, mosaics and glass or translucent tiles including glass mosaics.

BAL Grout

A classic tile grout, BAL Grout is water and frost resistant and can be used for joint widths up to 3mm. Suitable for grouting ceramics and mosiacs in dry or wet interior and exterior environments, BAL Grout is recommended for swimming pools. Further applications are possible by adding BAL Admix GT1 to provide flexibility, increased adhesion and high bond strength. Available in white only.

A fixers’ favourite for many years, BAL Grout exceeds the standard for a CG1 grout and is perfect for commercial and domestic situations. BAL Grout has a pot life of 60 minutes and cures in 24 hours. Temperature resistant from -30C to 150C, BAL Grout is available in 20kg, 10kg, 3.5kg and 1.5kg. Typical coverage of 6.4m2 per kg can be achieved for 200x200x6 mm tiles with joint widths of 2mm.

Floor Epoxy

BAL Floor Epoxy is a three-part hygenic impervious epoxy resin tile grout for floors. For joint widths up to 20mm, BAL Floor Epoxy is recommended for large installations including food preparation/processing plants, swimming pools/sports and leisure centres, shopping malls/supermarkets, hospitals and industrial/chemical plants. It is also suitable for chemical plants with metallic backgrounds, and for areas requiring chemical resistance.

With a resin-based formulation comprising liquid resin, liquid hardener and powder filler, BAL Floor Epoxy offers numerous benefits for the fixer working on large-scale commercial projects. Suitable for most tile types, Floor Epoxy cures in 24 hours and has a pot life of 60 minutes. In addition BAL Floor Epoxy is hard-wearing and offers high resistance to abrasion and impact, as well as providing protection against bacteria and chemical attack. Available in Smoke and Ebony, BAL Floor Epoxy comes in 10kg packs. Bespoke colours available – minimum order quantities apply.

Easypoxy AG

New and improved BAL Easypoxy AG is a high strength, chemical-resistant and solvent free epoxy adhesive and grout for walls and floors in hygiene critical locations such as kitchens, industrial/chemical plants, showers, swimming pools and hospitals. The new formulation provides users with an epoxy that is easier to mix, apply and clean-off during installations. Now available in white, black and grey, BAL Easypoxy AG has an excellent set time of only 12 hours, compared with 24 hours previously. The new formulation also has an extended pot life of 45 minutes for easier mixing.

BAL Easypoxy AG should be the number one consideration as your tile adhesive and grout when specifying commercial projects with hygienic critical environments and areas where additional chemical resistance is required. While BAL Easypoxy AG is not recommended for direct food contact, its use is recommended for food preparation areas where a hygienic, easily cleaned surface is required. Now available in 4kg, the product is perfect for ceramics, porcelain and fully vitrified tiles, mosaics and glass or translucent tiles including glass mosaics.

Easypoxy AG

New and improved BAL Easypoxy AG is a high strength, chemical-resistant and solvent free epoxy adhesive and grout for walls and floors in hygiene critical locations such as kitchens, industrial/chemical plants, showers, swimming pools and hospitals. The new formulation provides users with an epoxy that is easier to mix, apply and clean-off during installations. Now available in white, black and grey, BAL Easypoxy AG has an excellent set time of only 12 hours, compared with 24 hours previously. The new formulation also has an extended pot life of 45 minutes for easier mixing.

BAL Easypoxy AG is the perfect double-act for contractors – suitable as an adhesive and a grout for walls and floors. Crucially BAL Easypoxy AG provides a solution for hygiene critical environments where additional chemical resistance is required. BAL Easypoxy AG is waterproof and crucially does not permit the entry of bacteria or dirt. As a two-in-one product, BAL Easypoxy AG produces significant time and cost savings for the contractor. Now available is 4kg tubs the product is perfect for ceramics, porcelain and fully vitrified tiles, mosaics and glass or translucent tiles including glass mosaics.

Micromax2

Rapid-setting and highly flexible tile grout, BAL Micromax2 is formulated with built-in Microban antimicrobial protection for walls and floors. Suitable for joint widths from 1mm to 20mm, BAL Micromax2 sets in two to three hours, enabling faster completion. An efflorescence-free formulation minimises risk of patchy discolouration. A built in admixture ensures a clean and even finish for grout joints. It is available in a range of 20 colours including NEW Tornado Sky, Dovetail, Taupe Grey, Storm Grey, Walnut, Hazel, Mahogany, Cornflower White, Peppermint, Pink Champagne and Primrose.  Snow, Manilla, Gunmetal, Pebble, Jasmine, Ebony, Smoke, Anthracite and White remain in the collection. For large projects, additional colours are available upon request. What’s more, the range comes with with colour-matched Micromax Sealants.

Designed with the contractor in mind, BAL Micromax2 ticks all the boxes for a flexible grout providing all-round protection against mildew and black mould. Setting in only 2-3 hours, BAL Micromax2 allows tiling jobs to be completed quickly, allowing other trades onsite sooner. BAL Micromax2 is recommended for domestic and commercial installations due to its enhanced durability, making it suitable for power showers, wet rooms, heated floors and timber screeds. Recommended applications areas include leisure centres, bathrooms, changing rooms, restaurants/food consumption areas, domestic kitchens and shopping malls.

ALSO AVAILABLE: “Inspiration” collection (available at Topps Tiles) – Antique White, Lime, Praline, Pecan, Coffee, Cedar, Brooklyn, Cement, Graphite, Ash, Jade, Sky, Bush, Natural Light, Stonewash Blue, Powdered Rose. Regal Collection (available at Topps Tiles only): Regal Grey, Regal Smoke, Regal Vanilla, Regal Ash

BAL Grout

A classic tile grout, BAL Grout is water and frost resistant and can be used for joint widths up to 3mm. Suitable for grouting ceramics and mosaics in dry or wet interior and exterior environments, BAL Grout is recommended for swimming pools. Further applications are possible by adding BAL Admix GT1 to provide flexibility, increased adhesion and high bond strength. Available in white.

Specify BAL Grout for commercial and domestic tiling projects where cost savings are essential. Curing in 24 hours, it is suitable for use with ceramics and mosaics, and provides excellent coverage. While not suitable for food preparation areas, power showers and areas requiring waterproof grouting, BAL Grout is suitable for large scale projects including swimming pools, and areas of movement/vibration and heavily trafficked floors when used with BAL Admix GT1.

BAL Grout

A classic tile grout, BAL Grout is water and frost resistant and can be used for joint widths up to 3mm. Suitable for grouting ceramics and mosiacs in dry or wet interior and exterior environments, BAL Grout is receommended for swimming pools. Further applications are possible by adding BAL Admix GT1 to provide flexibility, increased adhesion and high bond strength. Available in white only.

BAL Grout is perfect for use on commercial and domestic installations, providing a pot life of 60mins at 20C, and a cure time of 24 hours. Exceeding the standard for a CG1 grout, BAL Grout provides excellent coverage at approximately 6.4m2 per kg for 200x200x6mm tiles with joint width of 2mm. Temperature resistant from -30C to 150C, BAL Grout comes in handy pack sizes of 20kg, 10kg, 3.5kg and 1.5kg, making it suitable for any project.

Floor Epoxy

BAL Floor Epoxy is a three-part hygenic impervious epoxy resin tile grout for floors. For joint widths up to 20mm, BAL Floor Epoxy is recommended for large installations including food preparation/processing plants, swimming pools/sports and leisure centres, shopping malls/supermarkets, hospitals and industrial/chemical plants. It is also suitable for chemical plants with metallic backgrounds, and for areas requiring chemical resistance.

With a resin-based formulation comprising liquid resin, liquid hardener and powder filler, BAL Floor Epoxy offers numerous benefits for the contractor as it is particularly recommended for large-scale commercial projects. Suitable for most tile types, BAL Floor Epoxy cures in 24 hours and has a pot life of 60 minutes, meaning fewer mixes are needed producing cost and time savings. In addition BAL Floor Epoxy is hard-wearing and offers high resistance to abrasion and impact, as well providing protection against bacteria and chemical attack. Now Available in Smoke and Ebony. Bespoke colours available – minimum order quantities apply.

Floor Epoxy

BAL Floor Epoxy is a three-part hygenic impervious epoxy resin tile grout for floors. For joint widths up to 20mm, BAL Floor Epoxy is recommended for large installations including food preparation/processing plants, swimming pools/sports and leisure centres, shopping malls/supermarkets, hospitals and industrial/chemical plants. It is also suitable for chemical plants with metallic backgrounds, and for areas requiring chemical resistance.

Suitable for most floor tile types, specifiers should consider BAL Floor Epoxy for large-scale commercial developments where chemical protection is required. Formulated with a liquid resin, liquid hardener and powder filler, BAL Floor Epoxy is extremely hardwearing and offers high resistance to abrasion and impact. Setting in 24 hours it is available in Smoke and Ebony colours and is suitable in dry, wet, interior or exterior environments. and satisfies the requirements of The Food Safety (General Food Hygiene) Regulations 1995. Bespoke colours available on request – Minimum Order Quantities apply.