BAL Priming Slurry Bond

A highly polymer modified cement-based priming slurry – engineered for fixing natural stone and porcelain tiles or pavers in external areas onto BAL Bedding Mortar. Fast and simple to use, only requires mixing with water. BAL Priming Slurry Bond provides excellent bond strength between base and pavers or tiles. Also use to prepare backgrounds for receiving mortar beds.

An essential component of BAL’s External Tiling Range. Easy to apply using only a brush, trowel or roller to achieve a minimum 2mm depth. Use BAL Priming Slurry Bond on the background, on top of bedding mortar and applied to the back of the tile, slab or paver. Provides excellent coverage of 8m2 at 2mm thickness.

ORDER TODAY

BAL Priming Slurry Bond

A highly polymer modified cement-based priming slurry – engineered for fixing natural stone and porcelain tiles or pavers in external areas onto BAL Bedding Mortar. Fast and simple to use, only requires mixing with water. BAL Priming Slurry Bond provides excellent bond strength between base and pavers or tiles. Also use to prepare backgrounds for receiving mortar beds.

Specify BAL Priming Slurry Bond as part of BAL’s External Range when designing or specifying external tiled or paved areas. BAL Priming Slurry Bond is a crucial component to bed BAL Bedding Mortar to the backgrounds and for applying suitable 20mm porcelain, stone and pavers onto the top of the Bedding Mortar.

BAL Priming Slurry Bond

A highly polymer modified cement-based priming slurry – engineered for fixing natural stone and porcelain tiles or pavers in external areas onto BAL Bedding Mortar. Fast and simple to use, only requires mixing with water. BAL Priming Slurry Bond provides excellent bond strength between base and pavers or tiles. Also use to prepare backgrounds for receiving mortar beds.

BAL Priming Slurry Bond provides a simple solution to bond mortar beds with backgrounds and for applying 20mm porcelain, stone and pavers to BAL Bedding Mortar. Easy to apply with only a roller, brush or trowel to a depth of at least 2mm. Provides excellent coverage of 8m2 at 2mm thickness.

BAL Level Out

BAL Level Out is a high performance, fast-setting external levelling compound for smoothing rough or impact damaged external concrete bases prior to tiling. BAL Level Out can be used from 2mm to 20mm thickness in a single application and is suitable for tiling after 3 hours, walkable after 2 hours at 20C. Water content can be reduced if gradient levelling has to be carried out.

BAL Level Out provides smooth and easy levelling of external areas. Pumpable, BAL Level Out requires 5.25ltrs of water per 25kg. A pot life of 30 minutes provides plenty of time to pour and spread per mix. Self-smoothing with great flow, BAL Level Out is water and frost resistant for long-life installations.

SPEAK TO A SALES MANAGER

BAL Level Out

BAL Level Out is a high performance, fast-setting external leveller for smoothing rough or impact damaged external concrete bases prior to tiling. BAL Level Out can be used from 2mm to 20mm thickness in a single application and is suitable for tiling after 3 hours, walkable after 2 hours at 20C. Water content can be reduced if gradient levelling has to be carried out.

Where levelling is needed on external concrete bases, think BAL Level Out – the easy-to-use external leveller. Just add 5.25ltrs of water and then pour! BAL Level Out will flow out easily and self-smooth. BAL Level Out provides installers with a 30 minute pot life for a longer time to pour and spread. Water and frost resistant ensures long-life installations.

FIND STOCKISTS

BAL Terrace Grout

BAL Terrace Grout is a high performance, polymer-modified cementitious grout for grouting joints between natural stone and porcelain tiles in external areas. With exceptional bond strength and flexibility, BAL Terrace Grout can used for joint widths up to 15mm. Available in four popular colours – Black, Light Grey, Dark Grey and Beige. Hard wearing, water and frost-resistant.

Mixing quickly on-site with water, BAL Terrace Grout provides a smooth finish on external tiled or paved patios, terraces and paths. Easy to spread, with a pot life of 45 minutes, BAL Terrace Grout is the fixers choice for jointing external pavers, tiles and natural stone. Available in 10kg bags, coverage is approximately 0.5kg/m2 at 5mm joint widths. 24 hours cure time.

 

BAL Priming Slurry Bond

A highly polymer modified cement-based priming slurry – engineered for fixing natural stone and porcelain tiles or pavers in external areas onto BAL Bedding Mortar. Fast and simple to use, only requires mixing with water. BAL Priming Slurry Bond provides excellent bond strength between base and pavers or tiles. Also use to prepare backgrounds for receiving mortar beds.

BAL Priming Slurry Bond is easy to apply using only a trowel, brush or roller, achieving a depth of at least 2mm. Should be applied wet on wet. Use slurry priming bond on both background, top of bedding mortar and applied to the back of the tile, slab or paver. Provides excellent coverage of 8m2 at 2mm thickness.

BAL Bedding Mortar

BAL Bedding Mortar is a special cement with graded fillers for producing a high performance mortar bed for external use, allowing external pavers and tiles to be fixed to the requirements of BS 7533-4. Bed depth can be achieved from 10mm up to 100mm thickness (minimum 25mm on MOT Type 1).

Pre-blended – just add water, BAL Bedding Mortar is easy to mix and lay up to 100mm in a single application. With more than 1hr working time and walkable in 12 hours it provides the perfect bedding system for 20mm porcelain, stone and pavers. It is also freeze-thaw resistant – protecting external installations against damage. Suitable on both bonded and unbonded backgrounds including concrete and Type 1 MOT.

BAL Bedding Mortar

BAL Bedding Mortar is a special cement with graded fillers for producing a high performance mortar bed for external use, allowing external pavers and tiles to be fixed to the requirements of BS 7533-4. Bed depth can be achieved from 10mm up to 100mm thickness (minimum 25mm on MOT Type 1).

Specify BAL Bedding Mortar for the application of external 20mm porcelain tiles, pavers or natural stone. Freeze/thaw resistant and suitable for both bonded and unbonded backgrounds including concrete and Type 1 MOT (minimum 100mm compacted base). 12 hour setting time once system is laid.

BAL Bedding Mortar

BAL Bedding Mortar is a special cement with graded fillers for producing a high performance mortar bed for external use, allowing external pavers and tiles to be fixed to the requirements of BS 7533-4. Bed depth can be achieved from 10mm up to 100mm thickness (minimum 25mm on MOT Type 1).

A simple pre-blended bedding mortar mix – easy to use for commercial installations. Mixes quickly on-site with water. Lay up to 100mm in a single application with more than 1 hour working time. Mortar is walkable in 12 hours after the application on stone, 20mm porcelain or pavers. Freeze/thaw resistant. Suitable on both bonded and unbonded backgrounds including concrete and Type 1 MOT.

 

BAL Terrace Grout

BAL Terrace Grout is a high performance, polymer-modified cementitious grout for grouting joints between natural stone and porcelain tiles in external areas. With exceptional bond strength and flexibility, BAL Terrace Grout can used for joint widths up to 15mm. Available in four popular colours – Black, Light Grey, Dark Grey and Beige. Hard wearing, water and frost-resistant.

An easy mixing external grout, BAL Terrace Grout provides contractors with a smooth, abrasion resistant jointing compound for external areas. 45 minute pot life ensures longer time to mix and grout tiled or paved patios, terraces and paths. Available in 10kg bags, coverage is approximately 0.5kg/m2 at 5mm joint widths. 24 hours cure time.

BAL Terrace Grout

BAL Terrace Grout is a high performance, polymer-modified cementitious grout for grouting joints between natural stone and porcelain tiles in external areas. With exceptional bond strength and flexibility, BAL Terrace Grout can used for joint widths up to 15mm. Available in four popular colours – Black, Light Grey, Dark Grey and Beige. Hard wearing, water and frost-resistant.

An easy mixing external grout, BAL Terrace Grout provides contractors with a smooth, abrasion resistant jointing compound for external areas. 45 minute pot life ensures longer time to mix and grout tiled or paved patios, terraces and paths. Available in 10kg bags, coverage is approximately 0.5kg/m2 at 5mm joint widths. 24 hours cure time.

BAL Level Out

BAL Level Out is a high performance, fast-setting levelling compound for smoothing rough or impact damaged external concrete bases prior to tiling. BAL Level Out can be used from 2mm to 20mm thickness in a single application and is suitable for tiling after 3 hours, walkable after 2 hours at 20C. Water content can be reduced if gradient levelling has to be carried out.

Specify BAL Level Out for external concrete levelling prior to the application of 20mm porcelain, pavers, slabs or natural stone. Water and frost resistant ensures long-life installations. Fast setting ensure fast-track project completion. Suitable for both domestic and commercial applications.

SPEAK TO A SPECIFICATION MANAGER

BAL Bedding Mortar

BAL Bedding Mortar is a special cement with graded fillers for producing a high performance mortar bed for external use, allowing external pavers and tiles to be fixed to the requirements of BS 7533-4. Bed depth can be achieved from 10mm up to 100mm thickness (minimum 25mm on MOT Type 1).

BAL Bedding Mortar is an essential component of BAL’s new External Tiling Range. Easy to use – just add water – BAL Bedding Mortar can be laid up to 100mm in a single application on both bonded and unbonded backgrounds (Type 1 MOT minimum 100mm compacted base).

ORDER TODAY

BAL Terrace Grout

BAL Terrace Grout is a high performance, polymer-modified cementitious grout for grouting joints between natural stone and porcelain tiles in external areas. With exceptional bond strength and flexibility, BAL Terrace Grout can used for joint widths up to 15mm. Available in four popular colours – Black, Light Grey, Dark Grey and Beige. Hard wearing, water and frost-resistant.

The final component of BAL’s External Tiling Range, BAL Terrace Grout mixes quickly on site and provides a smooth and abrasion-resistant finish on external tiled or paved patios, terraces and paths. Available in 10kg bags, coverage is approximately 0.5kg/m2 at 5mm joint widths. 24 hours cure time.

ORDER TODAY

BAL Level Out

BAL Level Out is a high performance, fast-setting levelling compound for smoothing rough or impact damaged external concrete bases prior to tiling. BAL Level Out can be used from 2mm to 20mm thickness in a single application and is suitable for tiling after 3 hours, walkable after 2 hours at 20C. Water content can be reduced if gradient levelling has to be carried out.

BAL Level Out provides fixers and installers an option to smooth and level external concrete bases prior to the installation of 20mm external porcelain, slabs, pavers or natural stone. Self-smoothing with easy flow, it can be pumped on large commercial projects. Suitable for domestic and commercial external areas. Simply mix with water. Coverage of 0.8kg/m2 at 2mm thickness.

ORDER TODAY

AquaDrain EK

High performance, capillary passive surface drainage system for solid-bed tiling on balconies, patios and roof terraces. Available in 8mm and 16mm thickness, the mat quickly drains seepage water and provides three-dimensional water management to prevent trapped water which could lead to discolouration, staining, frost damage and efflorescence of moisture-sensitive natural stone, ceramic and concrete coverings. Can be used with 50mm cement-based drainage mortar, or 25mm epoxy MorTec® DRAIN system for variable height build-up.

Available in 10m rolls and 1x2m sheets (8mm only) the AquaDrain® EK drainage system is suitable for the installation of natural stone, concrete pavers , extruded and dry pressed ceramic tiles.  Use with AquaDrain® drain grates, ProFin® edge profiles and ProRin®  guttering for balcony and patio installations.  Join roll and sheet edges with AquaDrain® SK sealing tape.

AquaDrain T+

High performance capillary passive surface drainage system for direct point adhesion of slabs, natural stone, 20mm porcelain and other outdoor coverings on balconies, terraces and roof terraces. Providing the same benefits as a solid-bed system, AquaDrain® T+ has complete build up from only 23mm depending on matting and tile thickness chose, making it ideal for renovation projects.

Available in 8mm and 16mm thickness, AquaDrain® T+ ensures rapid and permanent drainage of the covering structure. The system also serves as a protective layer and filter layer and due to the large contact areas of 66%, high point loads are avoided. Use with AquaDrain® drain grates, ProFin® edge profiles and ProRin® guttering for balcony installations. Join roll edges with AquaDrain® SK sealing tape.Use with direct point adhesive method for thin build-ups.

AquaDrain EK

High performance, capillary passive surface drainage system for solid-bed tiling on balconies, patios and roof terraces. Available in 8mm and 16mm thickness, the mat quickly drains seepage water and provides three-dimensional water management to prevent trapped water which could lead to discolouration, staining, frost damage and efflourescence of moisture-sensitive natural stone, ceramic and concrete coverings. Can be used with 50mm cement-based drainage mortar, or 25mm epoxy MorTec® DRAIN epoxy drainage system for low construction heights.

Available in 10m rolls and 1x2m sheets (8mm only), the AquaDrain® EK drainage system is suitable for the installation of natural stone, concrete pavers , extruded and dry press ceramic tiles.  Use with AquaDrain® drain grates, ProFin® edge profiles and ProRin®  guttering for balcony and patio installations.  Join roll edges with AquaDrain® SK sealing tape.

AquaDrain TM

The AquaDrain® TM drain grate, with its extremely shallow frame, perfectly matches with the AquaDrain® T+ thin-laying drainage system for direct point adhesion of thin/lightweight coverings. Easy to cut on site, with adjustable legs, AquaDrain® TM allows the easy drainage of water at low door/ wall connections, while it prevents the back-up of dirt and grime from entering the drainage mat.

Available in steel, hot-dipped galvanised steel, or stainless steel, AquaDrain® TM allows safe drainage of outdoor surfaces and door joints at only 31mm construction height. Variable cut to length, it is easily height adjustable thanks to six adjustable screw feet. An integral dirt trap prevent fouling, while it is wheelchair accessible.

AquaDrain T+

High performance capillary passive surface drainage system for direct point adhesion of slabs, natural stone, 20mm porcelain and other outdoor coverings on balconies, terraces and roof terraces. Providing the same benefits as a solid-bed system, AquaDrain® T+ has complete build up from only 23mm depending on matting and tile thickness chose, making it ideal for renovation projects.

Available in 8mm and 16mm thickness for variable height build-ups, AquaDrain® T+ ensures rapid and permanent drainage of the covering structure. The system also serves as a protective layer and filter layer and due to the large contact areas of 66%, high point loads are avoided. Use with AquaDrain® drain grates, ProFin® edge profiles and ProRin® guttering for balcony installations. Join roll edges with AquaDrain® SK sealing tape. Use with direct point adhesive method for thin build-ups.

AquaDrain FLEX

The AquaDrain® FLEX drain grate allows easy drainage of water at low door/wall connections with the AquaDrain® surface drainage systems for external tiling, while it prevents dirt from entering the drain grate guaranteeing permanent drainage performance.  Thanks to moveable legs, AquaDrain® FLEX drain grates can be cut individually on site.

Available in steel, hot-dipped galvanised, or stainless steel, AquaDrain® FLEX provides quick and umimpeded guidance of surface and façade water into the attached drainage system preventing water seepage into internal areas. AquaDrain® FLEX allows for practical and standard-compliant reduction fo door threshold heights from 150mm to 50mm

AquaDrain FLEX

The AquaDrain® FLEX drain grate allows easy drainage of water at low door/wall connections with the AquaDrain® surface drainage systems for external tiling, while it prevents dirt from entering the drain grate guaranteeing permanent drainage performance.  Thanks to moveable legs, AquaDrain® FLEX drain grates can be cut individually on site.

Available in steel, hot-dipped galvanised, or stainless steel, AquaDrain® FLEX provides quick and umimpeded guidance of surface and façade water into the attached drainage system preventing water seepage into internal areas. AquaDrai®n FLEX allows for practical and standard-compliant reduction for door threshold heights from 150mm to 50mm.

ProFin V22 and V55

The ProFin® V drain end profile is available in 22mm and 55mm in height. For use as part of the AquaDrain® surface drainage systems, each edge profile provides a clean finish and façade. The protruding profiles allows easy drainage of surface water, keeping the drainage channels free and protecting the natural stone coverings from water and frost damage.

Simple and easy to install, profiles can be linked with supplied profile connectors. Each 3m profile is prefabricated with seal-tight welded corner for easy assembly. Use if seal is already present on site.

AquaDrain TM

The AquaDrain® TM drain grate, with its extremely shallow frame, perfectly matches with the AquaDrain® T+ thin-laying drainage system for direct point adhesion of thin/lightweight coverings. Easy to cut on site, with adjustable legs, AquaDrain® TM allows the easy drainage of water at low door/ wall connections, while it prevents the back-up of dirt and grime from entering the drainage mat.

Available in steel, hot-dipped galvanised steel, or stainless steel, AquaDrain® TM allows safe drainage of outdoor surfaces and door joints at only 31mm construction height. Variable cut to length, it is easily height adjustable thanks to six adjustable screw feet. An integral dirt trap prevent fouling, while it is wheelchair accessible

ProFin DP and BL

The Gutjahr modular system of balcony profiles is a unique system of flexible, combinable drain profiles and fascias. Not only does it give you a combined drain and uncoupling profile when used in conjunction with the AquaDrain® drainage system, different heights can be realised with the easy slip-on ProFin® BL appatures, for height build-up from 21mm to 79mm.

Available in 11mm, 21mm and 30mm profiles, 90 °  corner units and affiliated connectors, ProFin® DP end profiles have unpunched legs for safe simple waterproof attachment of seals with DiProtec® AB-KV sealing tape technology. Height can be extended with the addition of ProFin® BL push-on facing plates. While the system  includes support for ProRin® balcony gutters. Use with AquaDrain® EK and T+ matting systems, BAL adhesives and grouts for full external tiling solutions.

AquaDrain Lochwinkel

For use as part of the AquaDrain® FLEX drain grate system for AquaDrain® EK capillary passive drainage system for external tiling.

The AquaDrain® Lochwinkel perforated screed angle ensures the drainage mortar does not fall into and block the drain grate.

ProRin BR

Easy to install gutter system for ProFin® DP edge profiles. Simply fit into the profile support – no soldering, no gluing, no welding thanks to intelligent connection technology. Compact system for narrow railing it can be combined with all Gutjahr profiles. Durable and damage-free, as the gutter connections serve as expansion joint zones.

 

ProFin DP and BL

The Gutjahr modular system of balcony profiles is a unique system of flexible, combinable drain profiles and fascias. Not only does it give you a combined drain and uncoupling profile when used in conjunction with the AquaDrain® drainage system, different heights can be realised with the easy slip-on ProFin® BL appatures, for height build-up from 21mm to 79mm.

Available in 11mm, 21mm and 30mm profiles, 90° corner units and affiliated connectors, ProFin® DP end profiles have unpunched legs for safe simple waterproof attachment of seals with DiProtec® AB-KV sealing tape technology. Height can be extended with the addition of ProFin® BL push-on facing plates. While the system  includes support for ProRin® balcony gutters. Use with AquaDrain® EK and T+ matting systems, BAL adhesives and grouts for full external tiling solutions.

MorTec SOFT

In combination with Gutjahr surface drainage systems, “the joint filler that comes in a tube” enables stress-free and therefore reliable laying of large formats  and natural stone tiles outdoors. The elastic, silicon-based joint filler reduces tension and can be used for covering and connecting joints or expansion joints. Its special feature: thanks to the fine grain structure of the material, the joints have a cement-like appearance.

Available in Grey, Anthracite and Dark Brown, MorTec® SOFT joint silicone sealant is neutral and solvent-free with added fungicide meaning it is suitable for natural stone, ceramics and porcelain. Absorbing movement from thermal changes and reducing tension, it can be used internally and externally. Use externally ONLY as part of Gutjahr external tiling systems.

ProFin V22 and V55

The ProFin® V drain end profile is avalable in 22mm and 55mm in height. For use as part of the AquaDrain® surface drainage systems, each edge profile provides a clean finish and facade. The protruding profiles allows easy drainage of surface water, keeping the drainage channels free and protecting the natural stone coverings from water and frost damage.

Simple and easy to install, profiles can be linked with supplied profile connectors. Each 3m profile is prefabricated with seal-tight welded corner for easy assembly. Use if seal is already present on site.

MorTec DRAIN

MorTec® DRAIN is a  two-part epoxy resin drainage mortar for use in combination with AquaDrain® EK surface drainage mat for thin-layer, lightweight solid-bed fixing of natural stone and ceramic coverings on balconies, patios, terraces and roof terraces. MorTec® DRAIN reduces required height construction by at least 25mm compared to cement-based drainage mortar systems, making it ideal for renovation work of if necessary construction height is lacking.

Lime-free, meaning no efflorescence due to water damage, MorTec® DRAIN assists rapid-drainage and speeds drying of natural stone avoiding water and frost damage. For lightweight constructions and low door height connections less than 50mm use with AquaDrain® EK 8mm matting and AquaDrain® TM drain grates and associated edge profiles.

ProRin BR

Easy to install gutter system for ProFin® DP edge profiles. Simply fit into the profile support – no soldering, no gluing, no welding thanks to intelligent connection technology. Compact system for narrow railing it can be combined with all Gutjahr profiles. Durable and damage-free, as the gutter connections serve as expansion joint zones.

AquaDrain Lochwinkel

For use as part of the AquaDrain® FLEX drain grate system for AquaDrain® EK capillary passive drainage system for external tiling.

The AquaDrain® Lochwinkel perforated screed angle ensures the drainage mortar does not fall into and block the drain grate.

MorTec DRAIN

MorTec® DRAIN is a  two-part epoxy resin drainage mortar for use in combination with AquaDrain® EK surface drainage mat for thin-layer, lightweight solid-bed fixing of natural stone and ceramic coverings on balconies, patios, terraces and roof terraces. MorTec® DRAIN reduces required height construction by at least 25mm compared to cement-based drainage mortar systems, making it ideal for renovation work of if necessary construction height is lacking.

Lime-free, meaning no efflorescence due to water damage, MorTec® DRAIN assists rapid-drainage and speeds drying of natural stone avoiding water and frost damage. For lightweight constructions and low door height connections less than 50mm use with AquaDrain® EK 8mm matting and AquaDrain® TM drain grates and associated edge profiles.

DiProtec AB-KV

An integral part of the Gutjahr external tiling system, DiProtec® AB-KV self-sealing adhesive tape technology ensures that balcony edge profiles are seamlessly connected with cement-based waterproof coatings such as BAL TANK-IT to create a permanent seal.  Half of the sealing tape is attached to the edge profile, while the other half is connected to the corresponding seal.

MorTec SOFT

In combination with Gutjahr surface drainage systems, “the joint filler that comes in a tube” enables stress-free and therefore reliable laying of large formats  and natural stone tiles outdoors. The elastic, silicon-based joint filler reduces tension and can be used for covering and connecting joints or expansion joints. Its special feature: thanks to the fine grain structure of the material, the joints have a cement-like appearance.

Available in Grey, Anthracite and Dark Brown, MorTec® SOFT joint silicone sealant is neutral and solvent-free with added fungicide meaning it is suitable for natural stone, ceramics and porcelain. Absorbing movement from thermal changes and reducing tension, it can be used internally and externally. Use externally ONLY as part of Gutjahr external tiling systems.

AquaDrain Edge

Use as an edge insulation tape for AquaDrain® EK laying system for large format and natural stone tiles. Creates a movement joint between the tile and edge profile.

Can also be used as a movement joint between drainage and parapet walls or walls in general.

DiProtec AB-KV

An integral part of the Gutjahr external tiling system, DiProtec® AB-KV self-sealing adhesive tape technology ensures that balcony edge profiles are seamlessly connected with cement-based waterproof coatings such as BAL TANK-IT to create a permanent seal.  Half of the sealing tape is attached to the edge profile, while the other half is connected to the corresponding seal.

AquaDrain Edge

Use as an edge insulation tape for AquaDrain® EK laying system for large format and natural stone tiles. Creates a movement joint between the tile and edge profile.

Can also be used as a movement joint between drainage and parapet walls or walls in general.

AquaDrain SK Joint Tape

Non-woven self-adhesive tape for covering the joints between AquaDrain® T+ and AquaDrain® EK capilliary passive drainage mats ensuring rapid and permanent drainage of the covering structure.

AquaDrain SK Joint Tape

Non-woven self-adhesive tape for covering the joints between AquaDrain® T+ and AquaDrain® EK capilliary passive drainage mats ensuring rapid and permanent drainage of the covering structure

AquaDrain EK

High performance, capillary passive surface drainage system for solid-bed tiling on balconies, patios and roof terraces. Available in 8mm and 16mm thickness, the mat quickly drains seepage water and provides three-dimensional water management to prevent trapped water which could lead to discolouration, staining, frost damage and efflourescence of moisture-sensitive natural stone, ceramic and concrete coverings. Can be used with 50mm cement-based drainage mortar, or 25mm epoxy MorTec® DRAIN system for variable height build-up.

Available in 10m rolls and 1x2m sheets (8mm only) the AquaDrain® EK drainage system is suitable for the installation of natural stone, concrete pavers , extruded and dry press ceramic tiles.  Use with AquaDrain® drain grates, ProFin® edge profiles and ProRin®  guttering for balcony and patio installations.  Join roll edges with AquaDrain® SK sealing tape.

AquaDrain T+

High performance capillary passive surface drainage system for direct point adhesion of slabs, natural stone, 20mm porcelain and other outdoor coverings on balconies, terraces and roof terraces. Providing the same benefits as a solid-bed system, AquaDrain® T+ has complete build up from only 23mm depending on matting and tile thickness chose, making it ideal for renovation projects.

Available in 8mm and 16mm thickness, AquaDrain® T+ ensures rapid and permanent drainage of the covering structure. The system also serves as a protective layer and filter layer and due to the large contact areas of 66%, high point loads are avoided. Use with AquaDrain® drain grates, ProFin® edge profiles and ProRin® guttering for balcony installations. Join roll edges with AquaDrain® SK sealing tape. Use with direct point adhesive method for thin build-ups.

AquaDrain Edge

Use as an edge insulation tape for AquaDrain® EK laying system for large format and natural stone tiles. Creates a movement joint between the tile and edge profile.

Can also be used as a movement joint between drainage and parapet walls or walls in general.

AquaDrain SK Joint Tape

Non-woven self-adhesive tape for covering the joints between AquaDrain® T+ and AquaDrain® EK capilliary passive drainage mats ensuring rapid and permanent drainage of the covering structure.

AquaDrain FLEX

The AquaDrain® FLEX drain grate allows easy drainage of water at low door/wall connections with the AquaDrain® surface drainage systems for external tiling, while it prevents dirt from entering the drain grate guaranteeing permanent drainage performance.  Thanks to moveable legs, AquaDrain® FLEX drain grates can be cut individually on site.

Available in steel, hot-dipped galvanised, or stainless steel, AquaDrain® FLEX provides quick and umimpeded guidance of surface and façade water into the attached drainage system preventing water seepage into internal areas. AquaDrain® FLEX allows for practical and standard-compliant reduction fo door threshold heights from 150mm to 50mm.

AquaDrain TM

The AquaDrain® TM drain grate, with its extremely shallow frame, perfectly matches with the AquaDrain® T+ thin-laying drainage system for direct point adhesion of thin/lightweight coverings. Easy to cut on site, with adjustable legs, AquaDrain® TM allows the easy drainage of water at low door/ wall connections, while it prevents the back-up of dirt and grime from entering the drainage mat.

Available in steel, hot-dipped galvanised steel, or stainless steel, AquaDrain® TM allows safe drainage of outdoor surfaces and door joints at only 31mm construction height. Variable cut to length, it is easily height adjustable thanks to six adjustable screw feet. An integral dirt trap prevent fouling, while it is wheelchair accessible.

AquaDrain Lochwinkel

For use as part of the AquaDrain® FLEX drain grate system for AquaDrain® EK capillary passive drainage system for external tiling.

The AquaDrain® Lochwinkel perforated screed angle ensures the drainage mortar does not fall into and block the drain grate.

ProFin DP and BL

The Gutjahr modular system of balcony profiles is a unique system of flexible, combinable drain profiles and fascias. Not only does it give you a combined drain and uncoupling profile when used in conjunction with the AquaDrain® drainage system, different heights can be realised with the easy slip-on ProFin® BL appatures, for height build-up from 21mm to 79mm.

Available in 11mm, 21mm and 30mm profiles, 90°  corner units and affiliated connectors, ProFin® DP end profiles have unpunched legs for safe simple waterproof attachment of seals with DiProtec® AB-KV sealing tape technology. Height can be extended with the addition of ProFin® BL push-on facing plates. While the system  includes support for ProRin® balcony gutters. Use with AquaDrain® EK and T+ matting systems, BAL adhesives and grouts for full external tiling solutions.

ProFin V22 and V55

The ProFin® V drain end profile is available in 22mm and 55mm in height. For use as part of the AquaDrain® surface drainage systems, each edge profile provides a clean finish and façade. The protuding profiles allows easy drainage of surface water, keeping the drainage channels free and protecting the natural stone coverings from water and frost damage.

Simple and easy to install, profiles can be linked with supplied profile connectors. Each 3m profile is prefabricated with seal-tight welded corner for easy assembly. Use if seal is already present on site.

ProRin BR

Easy to install gutter system for ProFin® DP edge profiles. Simply fit into the profile support – no soldering, no gluing, no welding thanks to intelligent connection technology. A compact system for narrow railing it can be combined with all Gutjahr profiles. The system is durable and damage-free, as the gutter connections serve as expansion joint zones.

 

MorTec DRAIN

MorTec® DRAIN is a  two-part epoxy resin drainage mortar for use in combination with AquaDrain® EK surface drainage mat for thin-layer, lightweight solid-bed fixing of natural stone and ceramic coverings on balconies, patios, terraces and roof terraces. MorTec® DRAIN reduces required height construction by at least 25mm compared to cement-based drainage mortar systems, making it ideal for renovation work of if necessary construction height is lacking.

Lime-free, meaning no efflorescence due to water damage, MorTec® DRAIN assists rapid-drainage and speeds drying of natural stone avoiding water and frost damage. For lightweight constructions and low door height connections less than 50mm use with AquaDrain® EK 8mm sheets and AquaDrain® TM drain grates and associated edge profiles.

MorTec SOFT

In combination with Gutjahr surface drainage systems, “the joint filler that comes in a tube” enables stress-free and therefore reliable laying of large formats  and natural stone tiles outdoors. The elastic, silicon-based joint filler reduces tension and can be used for covering and connecting joints or expansion joints. Its special feature: thanks to the fine grain structure of the material, the joints have a cement-like appearance.

Available in Grey, Anthracite and Dark Brown, MorTec® SOFT joint silicone sealant is neutral and solvent-free with added fungicide meaning it is suitable for natural stone, ceramics and porcelain. Absorbing movement from thermal changes and reducing tension, it can be used internally and externally. Use externally ONLY as part of Gutjahr external tiling systems.

DiProtec AB-KV

An integral part of the Gutjahr external tiling system, DiProtec® AB-KV self-sealing adhesive tape technology ensures that balcony edge profiles are seamlessly connected with cement-based waterproof coatings such as BAL TANK-IT to create a permanent seal.  Half of the sealing tape is attached to the edge profile, while the other half is connected to the corresponding seal.